How do I change a line to an arc in Solidworks?

How do I make an arc in Solidworks?

To sketch tangent arcs:

1. Click Tangent Arc .
2. Click. on the end point of a line, arc, ellipse, or spline.
3. Drag the arc to the desired shape and release. SOLIDWORKS infers from the pointer motion whether you want a tangent or normal arc. …
4. Click .

How do I change the line type in Solidworks?

To change the format of an existing edge or sketch entity:

1. Select the edge or sketch entity you want to change. To select more than one entity at a time, hold Ctrl as you select.
2. Click a tool on the Line Format toolbar and select a format from the menu. The new format is applied to the selected entities.

How do you make a circular pipe in Solidworks?

To create a circular profile sweep:

1. Open install_dir sampleswhatsnewpartssweep_part_1. …
2. Click Insert > Cut > Sweep to cut a tube into the part.
3. In the PropertyManager, under Profile and Path, click Circular Profile.
4. In the graphics area, select a curved edge for Path. …
5. Click .

How do you make a 3 point arc in Solidworks?

To sketch 3 point arcs:

1. Click 3 Point Arc .
2. Click to set a start point.
3. Drag the pointer. , then click to set an end point.
4. Drag to set the radius.
5. Click to set the arc.
6. Click . Video: Sketching a 3 Point Arc.

How do you do a hole callout in Solidworks?

To add a hole callout:

1. Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. …
2. Click the edge of a hole, then click in the graphics area to place the hole callout. …
3. Edit the callout in the Dimension PropertyManager. …
4. Repeat steps 2 through 4 to insert additional hole callouts, then click .

How do I change the section line style in Solidworks?

To modify a section line before creating the view:

1. Double-click a drawing view and sketch a line (or multiple lines for an aligned section view) in the view. …
2. With the line or lines selected, click Insert > Make Section Line.
3. Select the section line. …
4. Make any changes in the PropertyManager.
5. Do one of the following:

How do you change the line width in Solidworks?

To set line thickness:

1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
3. Click OK.

How do I remove a construction line in Solidworks?

To hide or show edges in a drawing:

1. Click Hide/Show Edges. …
2. Select the edges to hide (you can select edges individually, or use box selection), then click . …
3. To show edges, click Hide/Show Edges. …
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

How can you do this without selecting the arc tool?

You can transition from sketching a line to sketching a tangent arc, and vice versa, without selecting the arc tool. (Sketch toolbar) or click Tools > Sketch Entities > Line and sketch a line. Click the endpoint of the line, then move the pointer away. The preview shows another line.

What is required for a tangent arc?

When an arc is tangent to a circle, its center must be the radius distance away from that circle.

What type of arc can be transitioned to directly from sketching a line?

You can transition from sketching a line to sketching a tangent arc without selecting the Tangent Arc tool by autotransitioning .