How do I add a view in Solidworks?

How do I add a view layout in SolidWorks drawing?

To create a layout:

1. In the graphics area, select a drawing view.
2. Click Sheets > Layouts or View > Create Layout. The graphics area now shows only the selected view. Layout1 appears on the Sheets pane as the active layout.
3. Add views by dragging and dropping them to the layout.

How do I make multiple views in SolidWorks?

In the Model View PropertyManager:

1. Under Part/Assembly to Insert, in Open documents, select a document, or click Browse to locate a document.
2. Click. .
3. Under Orientation, select Create multiple views and click *Front, *Top, and *Right. (You can also select annotation views.)
4. Click. .

How do you add a view label in SolidWorks?

Right-click in the drawing view and click Add View Label. Double-click the icon. Type the text. In the PropertyManager, set options.
…
To automatically add a view label to a drawing view:

1. Click Tools > Options > Document Properties > Views > Other.
2. Select Add view label on view creation.
3. Click OK.

How do I align a section view in SOLIDWORKS?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

How do you create a 2D layout in SOLIDWORKS?

How to make a 2D drawing in SOLIDWORKS

1. If the part/assembly is open, select Make Drawing from Part/Assembly in the New flyout menu. …
2. Select Drawing to use a default template.
3. Click OK.
4. Select a sheet size and format.
5. Select a standard view orientation.
6. Begin a SOLIDWORKS 2D drawing.

How do I create an isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do I create a projected view in Solidworks?

To create a projected view:

1. Click Projected View. …
2. In the graphics area, select a view from which to project.
3. To select the direction of projection, move the pointer to the appropriate side of the selected view. …
4. When the view is where you want it, click to place the view.

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

What is view label?

The view_label parameter lets you change the name of the view under which the field is listed in the field picker without changing how it is referenced in LookML. If the label matches the name of an existing view, the field will now appear under that view.

How do I create a label in SolidWorks assembly?

Adding a Location Label to a Parent View

1. In a drawing, create a section, detail, or auxiliary view. …
2. Click Insert > Annotations > Location Label.
3. In the Location Label PropertyManager, set the options.
4. In the parent view, click on the section cutting line, detail circle, or view arrow.
5. Click .

How do you add a zone in SolidWorks?

Right-click the sheet format icon in the FeatureManager design tree, any blank area of the drawing sheet, or the sheet tab at the bottom of the drawing window, and select Properties. In the Sheet Properties dialog box, click the Zone Parameters tab. Set the options. Click OK.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

How do I create a half section view in Solidworks?

To create a half section view:

1. Open install_dir sampleswhatsnewdrawingssectionview3. slddrw.
2. Click Section View. …
3. In the Section View PropertyManager, click Half Section.
4. In Half Section, click Topside Right .
5. Move the pointer. …
6. Drag the preview to the right and click to place the section view.

How do you draw a section view?

When sketching an object or part that requires a sectional view, they are drawn by eye at an angle of approximately 45 degrees, and are spaced about 1/8” apart. Since they are used to set off a section, they must be drawn with care. It is best to use the symbol for the material being shown as a section on a sketch.