How do gears work in SolidWorks?

How do you use Gears in SOLIDWORKS?

Gears in the GB Standard

  1. From the Windows Start menu, click All Programs > SOLIDWORKS version > SOLIDWORKS Tools > Toolbox Settings.
  2. From the Configure Hardware page, click GB, Power Transmission, and then click Gears.
  3. Select the required GB gears and clear the unnecessary ones.
  4. Close Toolbox Settings.

How do you change Gears in SOLIDWORKS?

To edit Toolbox components from the Configure Component PropertyManager:

  1. In the FeatureManager design tree, Shift + select the configurations to modify.
  2. Right-click and click Edit Toolbox component. …
  3. Modify component properties. …
  4. Click .

What is a gear module?

“Module” is the unit of size that indicates how big or small a gear is. It is the ratio of the reference diameter of the gear divided by the number of teeth.

How do gears rotate?

Gears are wheels with teeth that slot together. When one gear is turned the other one turns as well. If the gears are of different sizes, they can be used to increase the power of a turning force. The smaller wheel turns more quickly but with less force, while the bigger one turns more slowly with more force.

What are gear ratios?

A gear ratio is the ratio of the number of rotations of a driver gear to the number of rotations of a driven gear. A colon is often used to show a gear ratio: gear ratio = rotations of a driver gear : rotations of a driven gear.

IT IS INTERESTING:  Is Rhino 3D good for architecture?

What is a bevel gear used for?

Bevel gears are used to connect shafts whose axes lie at an angle to each other, although in most applications the shafts are at right angles. The tooth profile is basically the same as used for spur gears except that the tooth gets progressively smaller as it approaches the apex of the projected cone.

How do you calculate gear teeth?

Gear Spur Tooth Strength Equation and Calculator.



Spur Gear Design Calculator.

To Find Equation
Outside Diameter (American Standard Stub Teeth) DO = ( N + 1.6 ) / P DO = [ ( N + 1.6 ) p ] / π
Outside Diameter DO = D + 2a
Pitch Diameter D = N / P D = (N p ) / π
Root Diameter DR = D – 2b

What is Toolbox in SolidWorks?

The Toolbox is a collection of several powerful tools built into SolidWorks; it can increase productivity and decrease the time required to complete a design. The Toolbox contains a vast library of standard hardware components that can easily be dropped into a design at any point.

What are the types of gear?

Read on to learn the different types of gear and the applications and industries that utilize them.

  • Spur Gear. Spur gears transmit power through shafts that are parallel. …
  • Helical Gear. …
  • Double Helical Gear. …
  • Herringbone Gear. …
  • Bevel Gear. …
  • Worm Gear. …
  • Hypoid Gear.

How do I create a gear profile in SOLIDWORKS?

Step 1:

  1. Open SW, then create a new document and choose Front Plane and sketch.
  2. Draw a 3x circule from the centre for construction. …
  3. Select Centerline and drav 4 lines, like in the photo. …
  4. Select a 3 PointArc and draw a line from the 2. to the 3.
IT IS INTERESTING:  How do I unlock bill of materials in Solidworks?
Special Project