Frequent question: How do you shorten the radius dimension in Solidworks?

How do you shorten a dimension line in Solidworks?

You can foreshorten (or clip) linear dimensions in any type of drawing view. To foreshorten linear dimensions: Right-click the side of the dimension to foreshorten and click Display Options > Foreshorten.

How do I change the radius in Solidworks?

To change the placement of circular dimensions:

1. Right-click the dimension.
2. In the Dimension PropertyManager, select the Leaders tab.
3. Under Witness/Leader Display, select a placement option. For example: Radius. Diameter. You can also right click the dimension and select Display Options.

How do you change the radius of a diameter in Solidworks?

How to turn a radius dimension into a diameter (TLDR version)

1. Select a dimension (in drawing, part or assembly)
2. Look in the properties menu on the left.
3. Click the Leaders tab.
4. Click one of the two diameter buttons.

How do I change the dimension of a dimension in Solidworks?

Applying a Style to a Dimension or Annotation

1. Select one or more dimensions or annotations.
2. In the PropertyManager or dialog box, select a style in Set a current Style.

How do you bend ordinate dimension in Solidworks?

Right-click an ordinate dimension, select Display Options, then choose from these options:

1. Align Ordinate. Aligns all the dimensions along the ordinate with the 0.0 ordinate.
2. Jog. Bends the leader line of a dimension and allows you to reposition the dimension.
3. Re-Jog Ordinate. …
4. Show Parentheses.

How do you create a diameter dimension in Solidworks?

To create a diameter, move the pointer to the far side of the centerline. Click to place the dimension. for diametric dimensions. Select other lines or points in the sketch to create additional dimensions.

What is dimension of radius?

[M0L0T]

How do you change a smart dimension from diameter to radius?

When you’re sketching, if you smart-dimension a circle, it’s always in diameter and if you want to do it in radius, you have to change it in Dimension Properties>Leaders>Witnesses/Leader Display, and there, change it to radius.

How do you change diameter to radius?

In that circle, find the middle point and draw a line. That line is the diameter. Just divide by two; half the diameter is the radius.

How do you change the diameter of a cylinder in Solidworks?

To change the diameter of the hole, click on the drop down + sign under Cut-Extrude in the Part tree on the left of your screen. Right click on Sketch then Edit Sketch. You can now change the dimensions on the circle by double clicking on the dimension shown on the sketch. Click OK.

How do you set a radius on a drawing?

Creating Radius Dimensions

1. Click Dimension > Radius (or type RadiusDimension).
2. In the graphics area: Select an Arc or Circle. Specify the location of the dimension line or specify an option: Angle, Note, or Text: See Editing and Formatting Dimension Text.

Is the diameter the radius?

The diameter is defined as twice the length of the radius of a circle. The radius is measured from the center of a circle to one endpoint on the boundary of the circle, whereas, the distance of diameter is measured from one end of the circle to a point on the other end of the circle, passing through the center.

How do I change dimension properties in SOLIDWORKS?

In a drawing, click Options (Standard toolbar), select Document Properties, and then select Dimensions.

How do you format dimensions?

For example, a dimension of a rectangular room on a blueprint, 14′ 11″ X 13′ 10″ equates to a room size of 14 feet, 11-inches wide by 13 feet, 10-inches long. Dimensions are expressed as width by length by height or depth in three-dimensional space.

How do I change dimension thickness in SOLIDWORKS?

To set line thickness and style:

1. Click Options , and then select the Document Properties tab.
2. Select the type of annotation or dimension for which you intend to customize the frame or leader line thickness.
3. Select a thickness from the list, or select Custom Size and enter a value for the custom thickness.