Frequent question: How do you replace fasteners in Solidworks?

How do you change Smart fasteners in solidworks?

Changing the Type of Smart Fastener



Under Results, select the Group whose fastener type you want to change. Under Series Components, in Fastener, right-click and select Change fastener type. Displays the full range of available fasteners based on the Standard and Type selected. Click OK.

How do you replace parts in an assembly in Solidworks?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.

Can you replace parts in Solidworks?

You can replace a part with a subassembly or vice versa. You can replace one, more than one, or all instances of a component at the same time.

How do you add a fastener in Solidworks assembly?

To add fasteners from the SolidWorks toolbox, open the task pane, find the fastener you want to add, and drag and drop it where you want it. Automatic mates will be added if you select a compatible edge. Once you drop the fastener, you can specify all the type settings.

What are SolidWorks smart fasteners?

Smart Fasteners automatically add fasteners to your assembly if there is a hole, hole series, or pattern of holes, that is sized to accept standard hardware. It uses the SOLIDWORKS Toolbox library of fasteners, which has a large variety of ANSI Inch, Metric and other standard hardware.

What is Toolbox in SolidWorks?

The Toolbox is a collection of several powerful tools built into SolidWorks; it can increase productivity and decrease the time required to complete a design. The Toolbox contains a vast library of standard hardware components that can easily be dropped into a design at any point.

How do you remove a part from assembly in Solidworks?

To delete a component from an assembly:

1. Click the component in the graphics area or in the FeatureManager design tree.
2. Press the Delete key, click Edit > Delete, or right-click and select Delete.
3. Click Yes to confirm the deletion.

How do you disassemble an assembly in Solidworks?

In the FeatureManager design tree, right-click the subassembly you want to dissolve, and select Dissolve Subassembly. You can also select the subassembly icon and click Edit > Dissolve Assembly. The components become components of the immediate parent assembly, and the subassembly is removed.

How do you replace a part in assembly in Creo?

In an open assembly, select one or more components to be replaced, right-click, and select from the shortcut menu or click Operations > Replace. The Replace dialog box opens.

Where is the Assembly toolbar in Solidworks?

To display SOLIDWORKS toolbars: Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize.

How do you add multiple fasteners in SOLIDWORKS?

Under Part/Assembly to Insert, do one of the following:

1. Ctrl + select several components from the list.
2. Click Browse. In the dialog box, Ctrl + select several components and then click Open.