Frequent question: How do I edit a break view in Solidworks?

How do I edit a broken view in SolidWorks?

Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them. To modify a broken view: To change the shape of the break lines, right-click a break line and select a style from the shortcut menu.

How do you delete a break view in SolidWorks?

To delete a model break view or break step:

1. In the ConfigurationManager, right-click the model break view or break step and click Delete.
2. In the dialog box, click Yes. You can undo the deletion of a model break. If you undo a model break view deletion, use Show Model Break View to restore the view in the graphics area.

How do you break a view in SolidWorks?

To create a break view:

1. Select a drawing view and click Break. (Drawing toolbar) or click Insert > Drawing View > Break.
2. Set options in the PropertyManager: Option. …
3. Click in the view twice to place two break lines, creating the break. …
4. Add additional break lines as necessary. …
5. Click .

What is a broken view in SolidWorks?

You can use a broken (or interrupted) view in a drawing. Broken views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines.

How do I create a partial section view in Solidworks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do you break an isometric view in Solidworks?

Model Break Views Within Drawings

1. In the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.
2. Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.

How do you break an angle view in SolidWorks?

In the PropertyManager, under Alignment: Choose the plane and rotation angle for the break.
…
Do one of the following:

1. Click Insert > Model Break View.
2. Click Model Break View (MBD toolbar).
3. In the ConfigurationManager , right-click a configuration and click New Model Break View .

How do you split a line in SolidWorks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.

How do you break a dimension line in SolidWorks?

On the Leaders tab of the respective PropertyManager, under Break Lines:

1. Select Break extension lines to break extension lines around dimension lines and other extension lines.
2. Select Break dimension line to break the dimension line around other dimension lines and other extension lines.

How do you make a foreshortened dimension in Solidworks?

To set a document-level default for the foreshortened style, with a drawing open, click Tools > Options > Document Properties > Dimensions > Linear and under Foreshortened, select a style. You can also specify to automatically foreshorten a linear dimension when the geometry of one end is outside the drawing view.

How do I align a section view in Solidworks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.