Frequent question: How do I add nuts in Solidworks?

How do you add bolts in Solidworks?

To add fasteners from the SolidWorks toolbox, open the task pane, find the fastener you want to add, and drag and drop it where you want it. Automatic mates will be added if you select a compatible edge. Once you drop the fastener, you can specify all the type settings.

How do you make a bolt and nut in Solidworks?

To round the head of the bolt :

1. Select one side of the head.
2. Draw a circle. …
3. Set the radius of the circle to 7 mm.
4. Go to feature, then click on Extrude Cut .
5. Under direction 1 on the Cut-Extrude feature, Set the depth of the cut to 1 mm.
6. Select Flip Side to Cut.
7. Press the icon and set the degree to 60.

How do you use hole Wizards in Solidworks?

You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .

How do I install a toolbox in Solidworks?

From the SOLIDWORKS menu, click Tools > Add-Ins . In the Add-Ins dialog box, under Active Add-ins and Start Up, select SOLIDWORKS Toolbox Utilities, SOLIDWORKS Toolbox Library, or both. You can also activate the SOLIDWORKS Toolbox Library add-in by clicking Add in now in the Toolbox Design Library task pane. Click OK.

How do you add threads in SolidWorks 2020?

To create a cut thread:

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following: …
4. For Thread method, click Cut thread. …
5. Set the starting position of the Thread Location:

How do you make threaded holes?

Keep the tap perpendicular to the metal and keep the handles of the wrench parallel to the metal. Slowly turn the wrench clockwise, pushing down with firm pressure. The tap will begin to cut threads into the inside of the hole. Continue pushing and turning until the tap goes clear through, past the bottom of the hole.

How do you show a tapped hole in SolidWorks?

To add a hole callout:

1. Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. …
2. Click the edge of a hole, then click in the graphics area to place the hole callout. …
3. Edit the callout in the Dimension PropertyManager. …
4. Repeat steps 2 through 4 to insert additional hole callouts, then click .

What is a M3 bolt?

The M3 machine screw has a thread diameter of 3 millimetres, the M stands for millimetres followed by the size – in this case 3 mm. We stock different lengths and head types such as countersunk or pan head depending on the fitting you need.