Can you trim a feature line in Civil 3d?

Can you offset a feature line in Civil 3d?

Click Home tab Create Design panel Feature Line drop-down Create Feature Line From Stepped Offset Find. Do one of the following to specify the location for the offset: Specify the offset distance, then select the object to offset. Enter Through, then select the object to offset and select a through point.

How do you change the radius of a feature line in Civil 3d?

Use the Edit Curve command to edit the radius of feature line (or survey figure) arcs. When the radius is changed, the new arc is displayed and the existing arc is indicated with dashed highlighting. Click Modify tab Edit Geometry panel Edit Curve Find. Select the curve to edit.

Can you grade to a feature line?

When those two feature lines are added to a surface the slope will be calculated automatically when it triangulates between them. The only other thing you could do is delete one of them and use a grading object to create the second FL.

How do you remove a curve from a feature line in Civil 3d?

Use the Edit Curve command to edit the radius of feature line (or survey figure) arcs.

…

To Edit Feature Line Curves

1. Click Modify tab Edit Geometry panel Edit Curve Find.
2. Select the curve to edit. …
3. In the Edit Feature Line Curve dialog box, edit the curve.

How do you curve a feature line?

Edit Curve

1. Select blue feature line.
2. Contextual ribbon > Edit Geometry panel > Edit Curve. Select feature line curve to edit or [Delete]: Click feature line curve. Radius: 87′ Apply OK.

What does the fit curve edit for a feature line do?

Curved feature lines



To avoid tessellation, you can create a feature line from a 2D polyline with arcs, and then apply elevations using the Grading Elevation Editor. If you want to create a grading from a footprint that has tessellated curves, you can use the Fit Curve command to convert the tessellation to true arcs.

How do you create a grading side slope from a feature line in Civil 3D?

When prompted to select a feature, click the blue feature line that is offset from the building pad. When prompted to select the grading side, click outside the offset feature line. Press Enter to apply the grading to the entire length of the feature line. Press Enter to accept the default Slope Cut Format.