Contents
How do you Sketch text on a curved surface in Solidworks?
How to write a text on curved surface, solidworks 2012
- Create a curved surface.
- Create e new plane. This plane must be tangent to the curved surface.
- In the Features menu click on Wrap tool.
- Select the plane tangent to the curved surface. In the Sketch menu click the Text tool. …
- 17 likes.
How do you make a 3D Sketch in SolidWorks?
To create a 3D sketch, click 3D Sketch (Sketch toolbar) or Insert > 3DSketch . You can create 3D sketch entities on a working plane, or at any arbitrary point in 3D space. In 3D sketching, a graphical space handle helps maintain your orientation while you sketch on several planes.
How do you extrude to a curved surface in Solidworks?
Extruding Surfaces from a 2D or 3D Face
- Click Insert > Surface > Extrude.
- Select a face: …
- Select other faces to define the extrude as required. …
- Select the end condition.
- For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .
How do you draw a face in Solidworks?
To sketch on model faces:
- Select the planar model face on which you want to sketch.
- Click a sketch tool on the Sketch toolbar, click Sketch. , or click Insert > Sketch . …
- To sketch on a different face, exit the current sketch, select the new face, and open a new sketch.
How do you Sketch on a curved surface Catia?
3 Answers
- sketch the side profile of the buttons in a plane parallel to the front of the controller. if the buttons are mirror image of each other, just sketch one button.
- pad the sketch to define the button width.
- add fillets to round off the button ends.
- mirror the pad and fillets to make the second button.
How do you write on a surface in Solidworks?
Sketching Text
- Click a face of a part.
- Click Text. …
- In the graphics area, select an edge, curve, sketch, or sketch segment. …
- In the PropertyManager, under Text, type the text to display. …
- Set the properties in the Sketch Text PropertyManager as necessary.
- Click .
- With the sketch still open, extrude or cut the text.
How do you Sketch a project?
Project geometry onto a sketch plane
- On the Sketch contextual tab, select Create > Project/Include > Project . …
- In the dialog, select a Selection Filter: …
- In the canvas, select the bodies, faces, edges, or points to project.
How do you project a line on a surface in Solidworks?
To project a curve:
- Click Project Curve on the Curves toolbar, or Insert > Curve > Projected.
- In the PropertyManager, under Selections, set Projection type to one of the following: Sketch on faces. Use this selection to project a sketched curve onto a model face.
How do you paint a straight line on a curved wall?
Straight Line Join
- Paint one of the walls. …
- Tap a small nail into the trim under the wall, at the point where you want the colors to change. …
- Run a strip of blue painter’s tape flush with the chalkline, from the top of the wall to the bottom. …
- Paint the second wall with your second color. …
- Remove the tape.