Can you mate in Fusion 360?

Can you work together in Fusion 360?

Sharing Your Designs with Fusion Team Collaboration



Open your project in Fusion 360. Select File » Share » Share Public Link to open the Share Public Link dialog. Select the first checkbox to enable sharing of your design with a public link. This will generate a link that can be given to anyone on your team.

How do you mate two faces in fusion?

In Fusion 360, this type of relationship can be created with a right click. While in the joint command, right click, select “between two faces”, then select the two surrounding faces.

Can multiple people use Fusion 360?

A Fusion 360 subscription can be used on multiple machines, per the Terms of Service. The data and active subscription are linked with each individual Autodesk ID so Fusion 360 can be accessed wherever.

Can you make assemblies in Fusion 360?

To begin, all of the components for the assembly need to be imported into Fusion 360, so they can be accessed from the data panel. Once this is done, the creation of the assembly can be started by: Create a new design for the assembly and save it.

How do you add people to your team on Fusion 360?

Follow the steps listed:

1. Access the Team Hub on the web browser myhub.autodesk360.com.
2. Click the Profile Button in the top right corner.
3. Select “Admin”.
4. Select “Members and Roles”
5. Select “Invite”.
6. Enter the email address and send the invitation.
7. The invitee will receive an email in their inbox to accept the invitation.

How do I add someone to my fusion project?

After you create a project, you can add or invite people to your Fusion 360 project.

…

From the Fusion Team site:

1. Open a project in Fusion Team.
2. Click the Project Members tab.
3. Click Invite.
4. Enter email address(es).
5. Select the Role for the invitee(s).
6. Click Send Invitations.

What is a joint origin in Fusion 360?

A Joint Origin defines the geometry that will be used to relate two or more components with joints in Fusion 360. The Joint command creates joint origins within the context of a specific joint. The Joint Origin command creates independent joint origins to facilitate more complex joint locations.

How do you use a joint in Fusion 360?

Create a joint between the shaft and the gear housing



In the Model workspace, choose Assemble > Joint. In the Joint dialog, set Motion Type to Revolute. Fusion 360 enables the required degrees of freedom for the motion type. Fusion 360 automatically chooses the Z axis, but you can specify another axis if necessary.

How can you share project with another person in Fusion 360?

Inside Fusion 360, open the Data Panel and locate the Design you’d like to share. Right-click on the design and select Share Public Link. In the next dialogue window, check the first box to activate the public link.

How many people can use a Fusion 360 license?

Limited to 10 active and editable Fusion 360 documents, unlimited inactive documents. Single user data management only. Forum support only.

How do you add parts to an assembly in Fusion 360?

Open the design that everything will inserted into (the ‘Assembly’ file). Open the data panel.

…

Select Insert into Current Design.

1. All bodies, components, and sketches from that file will now be inserted into the Assembly file.
2. Move the model into the desired position.
3. Click OK.

What is the difference between a body and a component in Fusion 360?

Components have their own origin planes, whereas bodies do not. We established earlier that components are parts in Fusion 360 that can have motion relationships with one and another. This is made possible due to them having their own origin planes.

How do you do a section view in Fusion 360?

The Section Analysis tool creates a section of a model and allows to see inside it:

1. Choose Inspect -> Section Analysis.
2. Select a face or plane for the section view to start on.
3. Use the manipulators to position the section view.
4. Click OK. Fusion will add the section view to the Analysis folder in the browser tree.