Best answer: How do you remove a section view in Solidworks?

How do you delete a section view in Solidworks?

To delete views:

1. Right-click anywhere in a drawing view and select Delete.
2. Click Yes to confirm the deletion. If you delete a detail or section view, select Delete detail sketch or Delete section sketch so the sketch used to create the view is also deleted.

What is removed sectioning?

A section removed from its normal projected position in the standard arrangement of views is called a “removed” section. Such sections are labeled SECTION A-A, SECTION B-B, etc., corresponding to the letter designation at the ends of the cutting plane line.

How do I remove section view?

Creating Removed Section Views

1. In a drawing, select a view.
2. Click Removed Section (View Layout CommandManager tab or Drawing toolbar).
3. In the PropertyManager, for Edge and Opposed Edge, select two edges from the same drawing view. …
4. Select a cutting line placement method: …
5. Move the pointer and click to place the view.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

What is revolved section?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

What is a full section view?

Full Section. ∎ In a full section, the cutting plane line. passes fully through the part. ∎ Normally a view is replaced with the full. section view.

What is removed section in engineering drawing?

The removed section technique is a very useful technique to show the important details of a complex part on the technical drawing sheets. To create a removed section from a part, you need to show the section as section A-A, section B-B, etc. on the main part.

How do you delete a section view in Civil 3d?

The best way to delete section view groups is by right-clicking the group in Prospector and selecting Delete, as shown in the first image in this sidebar.

How do you draw a section view in Solidworks?

Creating a Section View Manually

1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
3. Sketch a section line. …
4. Click to place the view.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

When and why is a section view necessary?

In which case, the direction of sight is towards one half of the object. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.

How do you identify a section view?

A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.