Best answer: How do I find a draft in Solidworks?

How do I view draft analysis in Solidworks?

To perform an analysis:

1. Click Draft Analysis (Mold Tools toolbar) or View > Display > Draft Analysis. Set analysis parameters and color settings, and then click .
2. Click View > Modify > Draft Analysis.
3. Click Draft Analysis (View toolbar) or View > Display > Draft Analysis.

How do I edit a draft in Solidworks?

Changing Draft Using DraftXpert

1. In the DraftXpert PropertyManager, select the Change tab.
2. Under Drafts to Change, select the draft items to modify for Faces to Draft . …
3. Set a value for Draft Angle and click Change to modify the draft for the selected faces.

What is a draft feature?

The Draft feature adds a draft angle from -89.9° to +89.9° to individual surfaces or to a series of surfaces. You can draft only the surfaces that are formed by tabulated cylinders or planes. To access the Draft feature, click Model > Draft.

What is Draft command?

Add Draft command. Add Draft command. Adds a draft angle to one or more part faces. To construct a simple draft feature, you first define a draft plane, then select the faces you want to draft, and finally you define the draft angle and direction.

What is draft analysis?

The Draft Analysis command enables you to detect if the part you drafted will be easily removed. This type of analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft direction at any point, corresponds to specified values.

How do you change the draft angle in Solidworks?

Changing Draft Using DraftXpert

1. In the DraftXpert PropertyManager, select the Change tab.
2. Under Drafts to Change, select the draft items to modify for Faces to Draft . …
3. Set a value for Draft Angle and click Change to modify the draft for the selected faces.

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).

What is a draft feature in Solidworks?

Draft tapers faces using a specified angle to selected faces in the model. One application is to make a molded part easier to remove from the mold. You can insert a draft in an existing part or draft while extruding a feature. You can apply draft to solid or surface models.

What is an example of a draft?

The definition of draft is something that is used for pulling, drawn from a cask or is in a rough form. An example of draft is a horse that pulls a beer truck. An example of draft is a beer on tap. An example of draft is a book without any corrections made.

What is meant by draft angle?

A draft angle is calculated as a degree measurement (or, less often, an inch or millimeter measurement) from the vertical axis of a mold, and it helps account for thermoplastic shrinkage, a practical reality of the injection molding process for most materials.

How do I add draft angles in Creo?

To modify the draft angle, type or select a value in the box on the Draft tab. You can also drag the square handle connected to the draft angle, or double-click the draft angle value in the graphics window and type or select a value.

How do I use draft tool in Catia?

Click and first select the neutral element of your choice. The pulling direction that appears is then normal to the neutral element. Select the face to be drafted and click OK to create your first draft.