Your question: How do you use void form in Revit?

How do you do a void extrusion in Revit?

Click in the drawing area, and draw a closed loop that intersects solid geometry. Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form). A void form extrusion is created.

How do you make a void wall in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

What are void forms?

Void Forms are sacrificial formwork elements designed to provide Void Space between Expansive Soil and the Foundation, while providing a temporary support formwork for the weight of concrete until it has reached a specified strength.

Where is the void in Revit?

On the Create tab Draw panel, select one of the drawing tools. Click in the drawing area, and draw a closed loop that intersects solid geometry. Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you use void extrusion?

Select the closed loop. Click Modify | Lines tab Form panel Create Form drop-down (Void Form). A void form extrusion is created. (Optional) Click Modify | Form Element tab Form panel (Solid Form) to convert this void to a solid.

How do you make a void roof in Revit?

Create an In-place family roof at choosing “Void extrusion”. Ideally in a section view draw the contourline of the void using the “Pick line” option on the base of the inside edge of the roof. Use the “Cut geometry” command and select first the roof than the void. After that you can click “Finish” to execute the cut.

What is void extrusion?

A solid or void extrusion is the easiest form to create. You sketch a 2D profile of the form on a work plane, and then extrude that profile perpendicular to the plane on which you sketched it.

Why is my void Orange in Revit?

“When you create a void form while in the Family Editor, it will appear in the 3D views as a transparent form and as orange lines in plan and elevation views, as long as it is not cutting any solid geometry.” So, if it’s not cutting anything, then it’ll be orange.

How do you make a void family in Revit?

Create a Void Family with an Elliptic Profile

1. Create a new family using the Metric Generic Model face based. …
2. Select the 3D Front view.
3. Click Create tab Datum panel (Reference Plane).
4. Place a new horizontal reference plane in the middle of the slab extrusion:
5. Select the new reference plane.
6. In the Properties palette:

Where is create tab in Revit?

The user interface is missing the Create Tab.

…

Solution

1. On the ribbon, click (Model In-Place). Architecture tab Build panel Component drop-down (Model In-Place) …
2. In the Family Category and Parameters dialog, select the family category, and click OK.
3. Enter a name for the in-place element family, and click OK.

What is a void wall?

The Void Wall is a wall placed Trap in Orcs Must Die! 2. Upgrades may cause the wall to produce coins or skeletons that fight back against other orcs. A Void Wall inflicts very high damage, enough to one-shot kill any enemy in regular play.