Your question: How do I create a roof profile in Revit?

How do you make a roof footprint in Revit?

Click Architecture tab Roof drop-down (Roof by Footprint). On the Draw panel, click (Pick Walls).

…

In the drawing area, do the following:

1. Highlight an exterior wall.
2. Press Tab to select the chain of walls.
3. Click to place the roof lines.
4. On the Mode panel, click (Finish).

How do you enter a roof geometry in Revit?

Click Modify tab Geometry panel (Join/Unjoin Roof). Select an edge of the roof that you want to join, and then select the wall or roof to which you want to join the roof.

Can the roof by extrusion tool be used in a plan view?

This is more easily done in a plan view, so switch to the Level 2 plan view. Then select the roof again, and on the contextual ribbon, click Vertical. When you use the Vertical Opening tool, you must create a closed loop. The area inside that closed loop will then be cut away from the roof.

How do I create a roof in Revit 2021?

To create a roof for the project, first open the level closely associated to the roof by double-clicking it in the Project Browser. Here, the Lower Parapet level will be used. Then, on the Architecture tab of the ribbon, click the Roof tool to enter sketch mode. Now you can select a tool from the Draw panel.

What does a roof by footprint mean?

Term used to describe boundaries of the exterior walls of a building or structure when placed on a piece of property. It can also describe the boundaries of the roof or covered area of the roof structure if there are no walls surrounding a building or structure.

Does a building footprint include the roof?

According to the LEEDuser glossary, «building footprint is the area on a project site used by the building structure, defined by the perimeter of the building plan». Taking this in consideration, a building’s footprint is the horizontal projected area of the built structure from the roof down to ground level?

What is the difference between roof by footprint and roof by extrusion in Revit?

Unlike the footprint method, the extruded roof generally won’t match the footprint of the building. No matter what shape your building is, the roof you create will be rectangular in footprint as it is extruded horizontally across the building.

How do you make a hip roof in Revit?

To create a simple hip roof with the ‘Roof by Footprint’ tool, follow the steps below.

1. Have your perimeter walls and levels ready.
2. In Architecture tab select Roof – Roof by Footprint tool and choose desired roof type.
3. Choose a relevant level for a bottom face of the roof.

Why won’t my roof join in Revit?

The problem is your lower constraint. You have made the Fascia of the Main Roof Zero (0mm) which made it horizontal. The Small roof (when using the Join Roof tool) is constrained by the lower edge of the fascia. Anything below that can not be joined.

How do I join a roof extrusion in Revit?

Click Modify tab Geometry panel (Join/Unjoin Roof). Select an edge of the roof that you want to join, and then select the wall or roof to which you want to join the roof.

How do you extrude a building in Revit?

Create an Extrusion

1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
2. Use the sketching tools to sketch the extrusion profile: …
3. On the Properties palette, specify the extrusion properties: …
4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
5. To view the extrusion, open a 3D view.