You asked: How do I link CAD details to Revit?

Why is my CAD link not showing up in Revit?

Causes: The CAD file has values much higher than the 20 mile limit for geometry from internal origin that was applied for Revit. The values themselves are not a problem but the CAD file has reference blocks that refer to 0,0,0 which is the cause of not displaying the CAD link.

How do you link a cad to a section view in Revit?

Go to Solution. When insert or link a CAD section/ elevation drawing in a Revit section/elevation view, check the box “Visible in current View only”.
…
I did the following:

1. Import CAD file into revit plan view.
2. explode it.
3. Delete raster images.
4. Create detail group.
5. Cut and paste into section.

Is it better to import or link CAD in Revit?

You will notice that there is two options to bring the DWG file: Import and Link. Avoid using Import CAD. It makes your model heavier, causing performance issues. Link CAD is better: it loads the latest version of the DWG each time you open Revit and is more efficient to manage the files.

How do you check active view in Revit?

Click View tab Graphics panel (Visibility/Graphics). On the Model Categories tab and Annotation Categories tab, check the Visibility settings for the types of elements that you added. If visibility for these elements is turned off, select the Visibility check box to make them visible.

What is VG in Revit?

Visibility Override

Method used to change the visibility status and graphic appearance of individual elements. Select the element in the drawing area, right-click, and apply a visibility override from the context menu.

How do I import a CAD file into Revit elevation?

Open the elevation in Revit, click the “Insert” tab, then the “Import CAD” button. A window will open that allows you to browse to the ACAD file you want. MAKE SURE THE BOX THAT SAYS “CURRENT VIEW ONLY” IS UNCHECKED!!! You need to be able to see the ACAD drawing in multiple views in order to move it to a wall surface.

How do I cut a section in AutoCAD?

To Create a Section Line (AutoCAD Mechanical Toolset)

1. Click Home tab Detail panel Section Line. …
2. Select a starting point for the section line .
3. Select the next point or points for the section line and press ENTER.
4. Enter a letter to reference the section line at the starting point.
5. Press ENTER.

How do I export a CAD file to Revit?

Click Insert tab Import panel (Import CAD). In the dialog, for Files of type, select the desired file type. Navigate to the folder that contains the file to import, and select the file. Tip: Make sure you import the geometric data needed for the Revit capability that you plan to use.

How do you link a file in Revit?

Open an existing model, and link another model to it.

1. Open an existing model or start a new model. You will link another model into this model.
2. Click Insert tab Link panel (Link Revit).
3. In the Import/Link RVT dialog, select the model to link. …
4. For Positioning, specify the desired option. …
5. Click Open.

Can I open DWG file in Revit?

Revit supports the import of ACIS objects contained in DWG, DXF, DGN, and SAT files. You can incorporate a Trimble® SketchUp® design into a Revit project to provide a starting point for the building model.

Why is my visibility graphics greyed out in Revit?

The Visibility/Graphics window will be greyed out (as shown above) if its included in the View Properties of the View Template. So make sure you go into the View Template and update the Visibility/Graphics or change settings to not included Visibility/Graphics.

How do you make a door visible in Revit?

Go to edit the family, select the lines and change the visibility setting. Or This family may be configured not to appear at a level of detail like Coarse o medium, Go to edit the family select the lines change the visibility setting.

How do I change the view range in Revit?

Modify the View Range

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. Alternatively, enter VR on the keyboard.
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.