Why can’t I select floor in Revit?

How do you select a floor in Revit?

In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. If desired, you can use a filter to select the floor.

How do you activate a floor plan view in Revit?

Add another view to your project or duplicate an existing view.

1. Click View tab Create panel Plan Views drop-down, and then click. (Floor Plan) …
2. In the New Plan dialog: For Type, select a view type from the list, or click Edit Type to modify an existing view type or create a new view type. …
3. Click OK.

How do you get more floors in Revit?

Add Levels

1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
3. Place the cursor in the drawing area and click. …
4. Draw level lines by moving the cursor horizontally. …
5. Click when the level line is the correct length.

How do you change the floor level in Revit?

Resize level lines: Select a level line, click on the blue grips, and drag the cursor. See also Work with Levels in 3D Views. Select the box near the end of the level line to display the level annotation bubble. Change the level name: Select the level and click the name box.

How do you create a floor boundary in Revit?

To create a floor, define its boundaries by picking walls or sketching its profile with drawing tools.

1. Click Architecture tab Build panel Floor drop-down (Floor: Architectural). …
2. Draw the floor boundaries, using one of the following methods: …
3. On the Options Bar, for Offset, specify an offset for the floor edges.

How do you copy floor plans in Revit?

You can right click on a relevant plan view and duplicate view. Note that there are options here – Duplicate creates a fresh view. Duplicate with Detailing creates a new view, but incorporates the detail from the view that you have duplicated.

How do you create a floor plan?

There are a few basic steps to creating a floor plan:

1. Choose an area. Determine the area to be drawn. …
2. Take measurements. If the building exists, measure the walls, doors, and pertinent furniture so that the floor plan will be accurate. …
3. Draw walls. …
4. Add architectural features. …
5. Add furniture.

How do you set units in Revit?

How to change units in Revit – Project Units

1. Click Manage tab Settings panel. …
2. In the Project Units dialog, select the discipline.
3. Select the value in the Format column to change the display value for that unit type. …
4. Specify Units, if necessary.
5. For Rounding, select an appropriate value.

How do I add a section in Revit?

Click View tab Create panel (Section). (Optional) In the Type Selector, select a view type from the list, or click Edit Type to modify an existing view type or create a new view type. Place the cursor at the starting point of the section, and drag through the model or family.

How do you change level in Revit without moving model?

Click on work view, point (above or below), enter the distance, and press enter. Use “ZE”, zoom extents command. Whith one of the levels selected, go to “Edit Type”, in Properties. Change “Elevation Base” to “Survey Point”.

How do you add a floor to level 2 in Revit?

Add a floor for the second level

1. [STEP 1] Open [LEVEL 2] floor plan.
2. [STEP 2] Click [FLOOR] from [ARCHITECTURE] tab, under [BUILD] panel.
3. [STEP 3] Change the floor type to 3” LW Concrete on 2” Metal Deck, and verify the Level 2, and the Offset.
4. [STEP 4] Draw continued lines for the floor.