Where is the construction line in Fusion 360?

How do you build a construction line?

Create a Construction Line by Specifying Two Points

1. Click Home tab Draw panel Construction Line. Find.
2. Specify a point to define the root of the construction line.
3. Specify a second point through which the construction line should pass.
4. Continue to specify construction lines as needed. …
5. Press Enter to end the command.

What are construction lines?

Construction lines (also known as xlines) are temporary linework entities that can be used as references when creating and positioning other objects or linework. For example, you can use construction lines to prepare multiple views of the same item, or create temporary intersections to serve as object snaps.

What is a green line in Fusion 360?

That means the sketches are locked (fix/unfix command) in the sketch pallet. Or they have been broken and fixed. If they are from a svg they are the same. You can select them when the sketch is active and click on the fix/unfix command to unlock them.

How do I move a line in Fusion 360?

While you are editing a sketch, Move will apply to sketch geometry. Invoke Move, select a line, drag up (for the Y direction).

How are construction lines drawn?

About Construction Lines. Construction lines help lay out small or detailed parts of a design on a sheet. You can draw them automatically one at a time, in sets of parallel lines, or freehand, point by point. To draw a construction line, first specify a single datum point through which the construction line will pass.

What is line and types of lines?

In geometry there are four types of lines: Horizontal Line. Vertical lines. Parallel lines. Perpendicular lines.

What is the hidden line?

A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view.

What three planes are in Fusion 360?

Whenever you start a design in Fusion 360, you’re given 3 construction planes to work from: XY, YZ, and XZ, as illustrated below.