Where is Edit feature in Solidworks?

How do I edit a feature in Solidworks?

To edit the definition of a feature:

1. Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. …
2. Edit the definition in the dialog box by specifying new values or options.
3. Click OK to accept the changes.

Where is feature in Solidworks?

Finding Features

1. Click Find/Modify Features. (Tools toolbar) or Tools > Find/Modify > Find/Modify Features. …
2. Do one of the following: …
3. Do one of the following: …
4. Under Match, to search for suppressed features select Suppressed.
5. Under Match, to search for unsuppressed features select Unsuppressed.
6. Click Find Now.

How do I edit a Solidworks file?

Editing a Third-Party Native CAD File in SOLIDWORKS

1. Open the third-party native CAD file in SOLIDWORKS.
2. Right-click the feature and select Edit Feature .
3. In the PropertyManager, under File, click Browse to choose a different native CAD file format. …
4. Make changes to the part file using SOLIDWORKS features.

Where is direct editing in Solidworks?

The Direct Editing toolbar, visible in Figure 1 below, can be enabled by right clicking an existing tab of the SOLIDWORKS command manager (such as the Features tab) and choosing “Direct Editing.”

How do you edit an extrusion in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

How do I open a feature in SOLIDWORKS?

To set FeatureWorks to activate whenever you open SOLIDWORKS, click Tools > Add-Ins and select FeatureWorks under the Active Add-ins and Start-up columns.

Where is the Features toolbar in SOLIDWORKS?

SOLIDWORKS Toolbars

• Right-click in the window border and select or clear a toolbar name.
• Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do I edit an imported part in SOLIDWORKS?

Editing Imported Features

1. In the FeatureManager design tree, right-click the feature created from the imported document, and select Edit Feature. …
2. In the Files of type list, select the desired format.
3. Browse to select the desired file to import. …
4. Select the Match faces and edges check box, if desired. …
5. Click Open.

How do I edit a graphic in Solidworks?

To edit the definition of a feature:

1. Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. …
2. Edit the definition in the dialog box by specifying new values or options.
3. Click OK to accept the changes.

How do I edit a step file?

To edit a STEP, use Adobe Acrobat:

1. Open Adobe Acrobat and your STEP file.
2. Click the Edit tool in the right-hand panel.
3. Use the editing tools to make your desired changes.
4. Save your file.

How do you dissolve a feature in Solidworks?

In the FeatureManager design tree, right-click a subassembly or Ctrl + select multiple assemblies and select Dissolve Subassembly. You can also select the subassembly icon and click Edit > Dissolve Assembly. The components become components of the immediate parent assembly, and the subassembly is removed.

How do you move a cut Extrude in Solidworks?

To move more than one feature at a time, hold down Ctrl as you select the features.

…

To move a feature to a new place on a model:

1. Select Instant3D (Features toolbar).
2. In the graphics area, select the feature to move.
3. Use the handles to drag the feature to its new location.

How do you change depth in Solidworks?

To change the depth of the feature, type a new value in the Depth box, or use the arrows to change the value. To remove drafts from the feature, select the Modify Draft check box. Make sure the Extrude with Draft check box is cleared.

How do you remove Extrude in Solidworks?

Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces. The green area is the face defining the extrude.