What is the thread feature in Solidworks?

How do I use thread feature in Solidworks?

The Thread Tool can then be found underneath the Hole Wizard Tool on the Features tab of the Command Manager, or in Insert>Features>Thread. Once the Thread Tool is selected the location of the thread needs to be specified by selecting a circular edge. Then the thread specification should be set.

Where is thread in Solidworks?

Creating a Cut Thread

1. Open a part file. The diameter of the cylinder is 6mm. …
2. Click Insert > Features > Thread .
3. In the graphics area, select the top edge of the cylinder.
4. In the PropertyManager, under Specification: …
5. Under Thread Location: …
6. Under End Condition, click Maintain Thread Length. …
7. Click .

What is the difference between cut thread and extrude thread solidworks?

A Cut thread is extended and cut to match the end face. An Extrude thread is cut to match the end face.

What is thread feature?

The thread feature allows you to both extrude threads and cut threads so this cylindrical surface can be the inside of a hole or the outside surface of a shaft.

What is an internal thread?

Internal Thread: An internal thread is a thread on the inside of a member. Major Diameter: The largest diameter of the thread of the screw or nut. The term “major diameter” replaces the term “outside diameter” as applied to the thread of a screw and also the term “full diameter” as applied to the thread of a nut.

How do you read thread size?

Thread sizes are given in nominal sizes, not in the actual measurement. The exact measurement is slightly below the named or nominal size. For example, a 6mm bolt may measure 5.8mm or 5.9mm, but it is called 6mm bolt. It is also common to use “M” before the bolt size, such as M6 for a 6mm bolt.

How do I create a thread in Solidworks 2020?

Creating a Cut Thread

1. Open a model with a cylindrical part and click Insert > Features > Thread .
2. In the graphics area, select a circular edge.
3. In the PropertyManager, under Specification, set values for the following: …
4. For Thread method, click Cut thread. …
5. Set the starting position of the Thread Location:

How do you show threads in Solidworks drawing?

To insert cosmetic threads from assembly documents into drawings, click Insert > Model Items and click Cosmetic thread . In drawings, Insert Callout appears in the shortcut menu.

What are square threads called?

The square thread form is a common screw thread form, used in high load applications such as leadscrews and jackscrews. It gets its name from the square cross-section of the thread. It is the lowest friction and most efficient thread form, but it is difficult to fabricate.

What are standard thread sizes?

Standard Thread Pitch Chart

How do I edit a thread in Solidworks?

Editing Cosmetic Threads

1. In a part or assembly document, right-click the Cosmetic Thread feature and click Edit Feature .
2. Make the necessary changes in the Cosmetic Thread PropertyManager, and click .