What is revolve in Fusion 360?

What does the revolve tool do?

ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.

How do you revolve in Solidworks?

Click one of the following revolve tools:

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.

What is extrude in Fusion 360?

The Extrude command adds depth to open or closed sketch profiles or faces in Fusion 360. Note: When you invoke the Extrude command, and there is only one profile visible in your design, it is automatically selected. Design > Solid > Create > Extrude.

What is sweep Fusion 360?

Use the Sweep command to extrude a profile along a path to create a solid body in Fusion 360.

How do you revolve in Autocad?

The steps are listed below:

1. Create the above figure.
2. Select Revolve icon from the ribbon panel, as shown below: Or. …
3. Select the object to revolve with a small square cursor, as shown below:
4. Press Enter.
5. Specify the X, Y, or Z axis. If X-axis is selected: …
6. Press Enter.
7. Specify angle of revolution.
8. Press Enter.

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

How do you create a Revolve base in SolidWorks?

Creating Revolve Features

1. Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
2. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
3. Revolved Surface (Surfaces toolbar) or Insert > Surface > Revolve.