What is deformation scale in Solidworks?

What is deformation scale factor?

Deformation scale factor (or amplitude modulation) consists in scaling the maximum displacement amplitude for visualizing a deformed mesh image. You can either choose a large scaling coefficient to zoom on the deformed geometry or a small coefficient to obtain a realistic visualization.

How does solidworks calculate deformation?

To view the deformed model: Double-click Deformation in the Results folder in the SimulationXpress study tree. The deformed model is displayed.

How do you change a deformation scale factor?

Change the deformation scale factor



From the Common Plot Options dialog box, click the Basic tab if it is not already selected. From the Deformation Scale Factor area, toggle on Uniform and enter 10.0 in the Value field. Click Apply to redisplay the deformed shape. The state block displays the new scale factor.

What does ures mean in Solidworks?

URES mean how your model move in this direction. You have deformation scale 0.01… so it isn’t a real deformation. Real deformation is 1. But you use SimulationXpress so you can’t change this deformation.

How do you scale Ansys?

There are a few ways to do that.

1. Use symmetry. Is there any plane of symmetry in your model? …
2. Use Hex elements instead of Tet elements. …
3. Use a coarse mesh in the large volume that has a low gradient in the solution quantity, and apply mesh controls to have a fine mesh in the small volume of high gradient.

What is deformation Abaqus?

Deformations are the values of a deformed field output variable; for example, displacement or velocity. Abaqus/CAE computes the deformed shape by applying the deformations to the undeformed nodal coordinates. You can scale the deformations to magnify, reduce, or otherwise distort the deformed model shape.

How do I read solidworks simulation results?

Displaying SOLIDWORKS Simulation Results in the Graphics Area

1. Open an assembly that has a simulation study saved with it.
2. Click the Static 1 tab.
3. In the Simulation Study tree, right click Static 1 and click Run.
4. Click the Model tab.
5. Click Simulation Display (View toolbar) or View > Display > Simulation Display .

What is large displacement solidworks?

The large displacement solution assumes that the stiffness changes during loading so it applies the load in steps and updates the stiffness for each solution step. When Large displacement is selected in the Static dialog box, the static study is solved by stepping the load and updating the geometry.

How do you save simulation results in Solidworks?

Saving Result Plots

1. In the Simulation study tree, right-click the active plot icon and select Save As.
2. Click Plot Tools > Save As (Simulation CommandManager)
3. Right-click in the graphics area, and select Save As.

What is scale factor in Ansys?

Scale factor lets you adjust all the sizes in the model at once… By default, you should probably leave it as 1, which means that all the other sizes could be taken at face value. Then if you want to make the model 20% coarser, you can come back and set the scale factor as 1.2.

How do you plot deformation in Abaqus?

From the main menu bar, select PlotDeformed Shape. Tip: You can also plot the deformed model using the tool in the Visualization module toolbox. Abaqus displays the deformed model in the same increment and step that it last displayed the undeformed model.

How do you scale a part in Abaqus?

From the main menu bar, select Options Common or Superimpose; then click the Other tab in the dialog box that appears. Click the Scaling tab; the Scaling options appear. Toggle Shrink elements to request or suppress shrinking each element about its centroid.