What does the trim tool do solidworks?

How do I trim a solid part in SolidWorks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How many types of trim are in SolidWorks?

There are 2 types of trim options: Standard and Mutual surface trim in SolidWorks.

How do I trim a 3D model in SolidWorks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do I use surface trim?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

What is the cut surface?

A surface cut, also called dusting, is a technique/style of cutting that helps remove split ends and unhealthy flyaways without removing length or affecting the thickness of the hair.

How do you trim an intersecting body in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you trim outside in Solidworks?

Trimming with Trim Away Outside

1. Right-click the sketch and select Edit Sketch.
2. Click Trim Entities. (Sketch toolbar) or Tools > Sketch Tools > Trim.
3. In the PropertyManager, under Options, select Trim away outside .
4. Select two bounding sketch entities.
5. Select the sketch entities to trim.
6. Click . Video: Trim Away Outside.

How do I trim in Solidworks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you trim tubes in Solidworks?

To cut pipes or tubes that penetrate each other:

1. In the FeatureManager design tree, expand the route assembly .
2. Right-click Route. …
3. Right-click the point where the straight run and the branch intersect (the intersection of the 3D sketch segments), and select Penetrate.

How do I use the parting surface in Solidworks?

Manual Mode for Parting Surfaces

1. Click Parting Surfaces (Mold Tools toolbar).
2. Click Insert > Molds > Parting Surface.
3. Select a Parting Surface feature in the FeatureManager design tree and click Edit Feature .

How do you use the knit surface in Solidworks?

To knit surfaces:

1. Click Knit Surface on the Surfaces toolbar, or click Insert > Surface > Knit. Create adjacent, non-intersecting surfaces.
2. In the PropertyManager, under Selections: …
3. Select Gap Control to view edge pairs that might introduce gap problems, and to view or edit the knitting tolerance or gap range. …
4. Click OK .

How do I merge surfaces in Solidworks?

In the PropertyManager, under Selections:

1. Select faces and surfaces for Surfaces and Faces to Knit .
2. Select Try to form solid to create a solid model from enclosed surfaces.
3. Select Merge entities to merge faces with the same underlying geometry.