Quick Answer: How do I use the TRIM feature in SolidWorks?

How do I trim a solid part in Solidworks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

What is the function of trim entities in Solidworks?

The Trim Entities tool is mainly used for removing unwanted parts or portions from your design sketch. For trimming, you must have coincident sketch parts with another. The Sketch Trim Entities also consist of “Extend Entities” tool, which helps to extend or adjusting the lines.

How do I trim in Solidworks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do I trim a 3D model in Solidworks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do I use the parting surface in SolidWorks?

Manual Mode for Parting Surfaces

1. Click Parting Surfaces (Mold Tools toolbar).
2. Click Insert > Molds > Parting Surface.
3. Select a Parting Surface feature in the FeatureManager design tree and click Edit Feature .

What is the use of trim entities?

Extends or trims two sketch entities until they intersect at a virtual corner. Trims open sketch entities that lie inside two bounding entities. Trims open sketch entities outside of two bounding entities. You can use the Trim PropertyManager to select a trim type and control other trimming options.

How do you trim outside in Solidworks?

Trimming with Trim Away Outside

1. Right-click the sketch and select Edit Sketch.
2. Click Trim Entities. (Sketch toolbar) or Tools > Sketch Tools > Trim.
3. In the PropertyManager, under Options, select Trim away outside .
4. Select two bounding sketch entities.
5. Select the sketch entities to trim.
6. Click . Video: Trim Away Outside.

How do you cut intersecting parts in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you trim tubes in Solidworks?

To cut pipes or tubes that penetrate each other:

1. In the FeatureManager design tree, expand the route assembly .
2. Right-click Route. …
3. Right-click the point where the straight run and the branch intersect (the intersection of the 3D sketch segments), and select Penetrate.