Quick Answer: Can you mirror a feature in SolidWorks?

How do you mirror an object in Solidworks?

To create a mirrored, derived part:

1. In an open part document, click a model face or plane about which to mirror the part.
2. Click Insert > Mirror Part. …
3. Under Transfer, select any combination of items from the source part to be included in the opposite-hand version.

How do you mirror entities in Solidworks?

To mirror sketch entities as you sketch them:

1. Select a line or a model edge in an open sketch.
2. Click Dynamic Mirror Entities. (Sketch toolbar) or Tools > Sketch Tools > Dynamic Mirror . …
3. Create the sketch entities that you want to mirror. …
4. To turn mirroring off, click Dynamic Mirror Entities.

How do you mirror a view in Solidworks?

To mirror drawing views:

1. In a drawing, select a model, relative to model, or predefined drawing view.
2. In the PropertyManager, under Orientation, select Mirror view.
3. Under Mirror view, select Horizontal or Vertical.
4. Click .

Can you mirror a mirror in Solidworks?

In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. See Mirroring Features. Create an opposite-hand version of a part. In a part, select a face or plane to mirror about, and then click Insert > Mirror Part.

What does mirror entities do in Solidworks?

When you create mirrored entities, the SOLIDWORKS software applies a symmetric relation between each corresponding pair of sketch points (the ends of mirrored lines, the centers of arcs, and so on). If you change a mirrored entity, its mirror image also changes.

How do you mirror in Solidworks 2015?

To mirror a feature: Click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. Under Mirror Face/Plane , select a face or a plane in the graphics area. You can select features, the faces that comprise features, or a body with multibody parts.

How do you mirror sheet metal in Solidworks?

on the Features toolbar, or click Insert > Pattern/Mirror > Mirror.

…

You can also:

1. Mirror selected sheet metal features in the part.
2. Create a second, mirrored sheet metal body in the part.
3. Use the Insert > Mirror Part command to create a part that is an opposite-hand version of the original part.

How do I mirror a view?

To mirror a drawing view:

1. Select the drawing view.
2. Expand the “Mirror” option in drawing view properties.
3. Check the option “Mirror view” and choose whether you want to mirror a drawing view horizontally or vertically.

How do you mirror an isometric view in Solidworks?

To mirror drawing views:

1. In the drawing environment, select a Model, Relative to Model, or Predefined drawing view;
2. In the Drawing view PropertyManager, in the mirror panel, select Mirror view;
3. Under Mirror view, select Horizontal or Vertical.

How do I mirror text in Solidworks drawing?

Start by sketching a centre line (or regular line if you prefer). Then, select the line and run the Dynamic Mirror command. You’ll barely notice that it is running aside from a double-tickmark at either end of your selected line, and the fact that the Dynamic Mirror command appears to be a pressed button.

Can you mirror fillets in Solidworks?

You can mirror assembly features. After you add features (such as cuts, holes, and fillets) to an assembly, you can mirror them about a plane.

How do you invert a part in Solidworks?

To invert selection:

1. Select items to be excluded.
2. Click Invert Selection. (Selection filter toolbar) or Tools > Invert Selection.