Question: What is swept boss base SolidWorks?

Contents

What is swept in Solidworks?

A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.

How do you swept the boss in assembly in Solidworks?

Click Assembly Features (Assembly tab on the CommandManager) and click Swept Cut , or click Insert > Assembly Feature > Cut > Sweep . Set options as needed in the Swept Cut PropertyManager. Under Feature Scope, specify which components you want the feature to affect.

How do you use the swept tool in Solidworks?

Select a sketch in the graphics area for Profile . Select a sketch in the graphics area for Path .

…

Click one of the following:

Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
Swept Cut on the Features toolbar or Insert > Cut > Sweep.
Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

Can you sweep a body in Solidworks?

For cut sweeps only, you create a solid sweep by moving a tool body along a path. The path must be tangent within itself (no sharp corners) and begin at a point on or within the tool body profile.

…

Sweeps.

IT IS INTERESTING: How do you hide rows in a door schedule in Revit?

Use guide curves
Be created as thin features
	Sweep with solid feature	Sweep with thin feature

What is loft in Solidworks?

The loft feature is an important tool for (surface) modeling in SolidWorks. The loft feature creates a shape by making transitions between multiple profiles and guide curves. This tool is very valuable for modeling complex surfaces. You can do some really cool stuff when you use this feature properly.

How do you do a sweep?

Create a Sweep

In the Family Editor, on the Create tab Forms panel, do one of the following. …
Specify the sweep path: …
On the Mode panel, click (Finish Edit Mode).
Load or sketch a profile. …
On the Properties palette, specify the sweep properties. …
On the Mode panel, click (Finish Edit Mode).

How do you swept cut in SolidWorks?

Swept Cut PropertyManager

Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. For a solid profile, open a part that has a tool body as the profile and a sketch path to follow.
Click Swept Cut (Features toolbar).

What are applied features in SOLIDWORKS?

Applied features such as chamfers, fillets, and shells are applied directly to the model.

How do you sweep the boss base?

Set the PropertyManager options based on the sweep boss/base feature. To open this PropertyManager: Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. Click Swept Boss/Base (Features toolbar).

IT IS INTERESTING: You asked: Is Revit compatible with CAD?

What is SOLIDWORKS extrude boss base means?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.