Question: How do I change the closing point in Catia?

How do I close Catia?

Closing the Active CATIA Document



Open(sDocPath & _ “onlineCAAScdInfUseCasessamplesCAAInfReadDocument. CATPart”) ‘Close the active document which is the document just opened.

How do you use a multi section solid?

Click Multi-sections Solid . The Multi-sections Solid Definition dialog box appears. Select the three section curves as shown: They are highlighted in the geometry area.

…

Guides

1. Remove the selected curve.
2. Replace the selected curve by another curve.
3. Add another curve.

How do I remove multi section solid in Catia?

Creating Removed Multi-sections Solids

1. Select Closing Point 2 as shown on Section 2 to redefine the closing point.
2. Click Closing Point 2 arrow to reverse the direction. It is possible to edit the feature reference elements by first selecting a curve in the dialog box list then choosing a button to either:

How do I change solid in Catia?

CATPart document.

1. Select Body. 3 as the body to be replaced.
2. Right-click and select Replace… . The Replace dialog box is displayed.
3. Select Body. 4 as the replacing body. …
4. A Replace Viewer windows displays to help you select the replacing face. Select Face/Pad. …
5. Click OK to confirm and close the dialog box. Body.

How do I fill between two surfaces in Catia?

Creating Fill Surfaces

1. Click Fill in the Surfaces toolbar. …
2. Select curves or surface edges to form a closed boundary. …
3. Select the Continuity type to specify it between any selected support surfaces and the fill surface.

How do you make rib Catia?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 . …
3. Select the center curve, i.e. Sketch. 1 . …
4. To go on with our scenario, maintain Keep angle. …
5. Click OK .

Why is multi section Command used?

Although a single command, it has a lot of options in it called as – Coupling modes, which at times perplexes the user when and how to use which one. It can be used when a solid has to be generated and has multiple varying sections.