How do you use a linear pattern in Solidworks assembly?

How do I use the linear pattern tool in Solidworks?

Creating Linear Sketch Patterns

1. In an open sketch, click Linear Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Set values for Direction 1 (X-axis). …
4. Repeat for Direction 2 (Y-axis). …
5. Click .

Can we use pattern command in assembly mode?

You can pattern multiple components in one operation. You can select parts in the active assembly, entire subassemblies, and existing patterns of parts.

How do you move a linear pattern in Solidworks?

Click Linear Component Pattern (Assembly toolbar) or Insert > Component Pattern > Linear Pattern. Defines the direction to extend the pattern. Select a linear edge or a linear dimension. Reverses the side on which the pattern propagates from the seed component.

How do you show a linear pattern in Solidworks drawing?

In a drawing view, click Linear Note Pattern (Annotations toolbar) or Insert > Annotations > Linear Note Pattern . between the notes. You can also set the spacing in the graphics area .

How do you use a linear sketch pattern?

Creating Linear Sketch Patterns

1. In an open sketch, click Linear Sketch Pattern. (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Set values for Direction 1 (X-axis). …
4. Repeat for Direction 2 (Y-axis). …
5. Click .

Which is an example of a linear pattern?

Here are some other examples of linear number patterns: Starting with three and a difference of two: 3, 5, 7, 9, … Starting with five and a difference of three: 5, 8, 11, 14, …

How do I use patterns in Catia Assembly?

Reuse Pattern in CATIA V5

1. To initiate this, constrain the bolt to the original hole of the pattern. One method to find the original hole is to right click on one of the holes and select Center Graph.
2. Once the pattern in constrained, then click Reuse Pattern .

How do I use the pattern tool in Solid Edge?

A Pattern profile is the same as any other profile in Solid Edge.

…

The basic steps for defining a pattern feature are:

1. Select the geometry to pattern.
2. Draw the pattern profile or select an existing pattern sketch.
3. Select the parts to be modified by the pattern (assembly documents only).

What can be used as the pattern axis for a circular pattern?

When you are creating a circular pattern, you can only use a work axis as the axis of rotation.

How do you write a linear pattern in both directions?

Linear Component Pattern

1. Click Linear Component Pattern. …
2. In the PropertyManager, set options under Direction 1: …
3. Repeat for Direction 2 for a bidirectional pattern. …
4. Click in Components to Pattern , then select the seed components.

How do I select an axis in Solidworks?

Click Axis. on the Reference Geometry toolbar, or click Insert > Reference Geometry > Axis. Select the axis type in the Axis PropertyManager, then select the required entities for that type.