How do you trim mass in Revit?

How do I trim in Revit?

Procedure

1. Select the trim extend multiple command.
2. Select the item to trim or extend to.
3. Select the items to be trimmed or extended.

How do you edit mass materials in Revit?

Revit: How to assign a material to a conceptual mass element

1. Select the element.
2. Click on “Edit in Place” from the Modify | Mass Ribbon tab.
3. Select the element you want to apply the material to.
4. Look for a Material parameter in the element’s properties.

How do you cut multiple objects in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry) and select the void you created. Notice the cursor changes shape. Select the geometry you created in Step 3. Note: Select Multiple Cut on the options bar to select more than one element to be cut by the void.

How do you trim a spline in Revit?

Note: While you can’t use the Trim/Extend to corner command with Splines and you can’t modify a spline using the Trim/Extend (single element), you can modify a non-spline line using a spline line as the source i.e. start Trim/Extend command, select Spline first, and select non-spline line second (to trim/extend).

How do you change mass color in Revit?

Simply select your mass, and then on the Properties palette, click in the Material field and then click the small browse icon. This will open the material dialog where you can choose a material. Make sure the material has a color assigned to it or it will still look boring gray.

How do you assign materials in Revit?

How to apply a material to an element in Revit

1. Click Modify tab Geometry panel (Paint).
2. In the Material Browser dialog, select a material. Note that you can only browse for a material when you select the paint tool. …
3. Place the cursor on the element face to highlight it. …
4. Click to apply the paint.

Which Revit families can be cut?

If a family is cuttable, the family displays as cut when the cut plane of a view intersects that family in all types of views.

…

About Cuttable Families.

Can you cut a generic model in Revit?

You can cut objects in a project when a family with unattached voids is loaded. Objects that can be cut include: Walls, Floors, Roofs, Ceilings, and Structural Framing, Structural Columns, Structural Foundations, Casework, Furniture, Specialty Equipment, and Generic Models.

How do you cut out a void extrusion in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

What does cut with voids when loaded mean in Revit?

“Cut with Voids When Loaded: When selected, voids created in the family will cut through solids. The following categories can be cut by voids: ceilings, floors, generic models, roofs, structural columns, structural foundations, structural framing, and walls.”

How do I cut a void family in Revit?

Cutting with voids in families when loaded

1. Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters.
2. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK.
3. Load the family into the project and place it.