How do you split a body into two in SolidWorks?

How do you split a part in SolidWorks 2020?

To use the Split PropertyManager to divide a part into multiple bodies:

1. In a part, create a sketch to be used to cut the part into bodies.
2. Click Split (Features toolbar) or Insert > Features > Split.

How do you split a drawing in SolidWorks?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities. …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

How do you cut a solid body in Solidworks?

Surface Cut

1. Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. …
2. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.
3. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies.

How do you make a multi body in Solidworks?

Saving an Assembly as a Multibody Part

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

How do you cut intersecting parts in SolidWorks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you move a body in SolidWorks?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy. Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.

Where is the Split command in Solidworks?

To split bodies: Click Split (Features toolbar) or Insert > Features > Split.

How do I cut a half sketch in Solidworks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section. After you select and place the cutting line in the drawing view, the Section View popup displays.

How do you slice an object in Solidworks?

For more information, refer to SOLIDWORKS Help > Parts and Features > Mesh BREP Bodies . To access this tool, click Insert > Slicing. The Slicing PropertyManager creates 2D sketch sections.