How do you select planes in Revit?

Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.

How do you select a work plane in Revit?

Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).
…
In the Work Plane dialog, select another work plane.

1. Name—Choose an available work plane from the list, and click OK. …
2. Pick a plane—Revit creates a plane coincident to the selected plane.

How do you change planes in Revit?

Change the Work Plane of an Element

1. Select a work plane-based element in a view.
2. Click Modify | <Element> tab Work Plane panel (Edit Work Plane). …
3. In the Work Plane dialog, select another work plane. …
4. If needed, reposition the element on the work plane.

What are reference planes Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Use the Line tool or the Pick Line tool to draw a reference plane. Name each reference plane so you can assign it to be the current work plane.

How do you select by type in Revit?

When a tool for placing elements is active, or elements of the same type are selected in the drawing area, the Type Selector displays at the top of the Properties palette. To make the Type Selector available when the Properties palette is closed, right-click the Type Selector, and click Add to Quick Access Toolbar.

How do work planes work in Revit?

The work plane displays as a grid in the view. Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. Use this tool to select a new work plane that is parallel to the existing work plane. Use the Workplane Viewer to modify work plane-based elements of the model.

How do I get rid of work plane grid in Revit?

Do one of the following:

1. Click (Dissociate Work Plane), which displays in the drawing area near the selected element.
2. Use the Edit Work Plane tool: Click Modify | <Element> tab Work Plane panel (Edit Work Plane). In the Work Plane dialog, click Dissociate.

Where is reference plane in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

Where is reference line in Revit?

In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection.

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | <Element> tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.

What is reference line?

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

How do you add references in Revit?

Add a Reference Plane

1. On the Draw panel, click (Pick Lines).
2. On the Options bar, specify an offset, if desired.
3. Select the Lock option to lock the reference plane to the line.
4. Move the cursor near the line to which you want to place the reference plane and click.

Can you select similar in Revit?

10: How to Use Common Selection Methods in Revit

Left Click – Selects an Object. Right Click after object selection – contextual menu for repeating commands, selecting similar etc. CTRL + Left Click – Add singular elements to your current selection.

How do you select last in revit?

Simply press Ctrl + Left Arrow on your keyboard. Or you can right click your mouse and click select previous from contextual menu.

How do you select old in Revit?

Revit has also a way to select the previous selected object. I found it through HOK BIM Solutions (well actually through Google) and it is as simple as pressin Ctrl + Left Arrow. It saves loads of time, specially with complicated models where finding an object amongst a “jungle” of objects might take a while.