How do you rotate a 90 degree assembly in SolidWorks?

How do I rotate an assembly?

On the ribbon, click Assemble tab Position panel Free Rotate . Click the component to rotate. Drag to the appropriate view of the component. To rotate in any direction, click inside the 3D rotate symbol and drag in the appropriate direction.

How do I change the direction of Assembly in Solidworks?

Select the top view from view orientation of “Heads-up View Toolbar” or press “ctrl+5” then click Update Standard View button and choose the front view. A pop-up message will show-up to confirm if you want to change the view, click yes. This feature is the easiest way to change the orientation of your part.

How do you Rotate a 180 degree in Solidworks assembly?

Using a Triad to Rotate a Component

1. To snap, right-click the selected ring and choose Snap while Dragging. …
2. To rotate in pre-set increments, right-click the selected ring and choose Rotate 90° or Rotate 180°.
3. To type specific increments, right-click the center sphere and select Show Rotate Delta XYZ Box.

How do you fix Assembly in Solidworks?

To fix or float an assembly component:

1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
2. Select Fix or Float.
3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do I change the orientation of the first part in a SolidWorks assembly?

To fix this, go to Insert, Features, Move/Copy.



In the PropertyManager, make sure you are in Translate/Rotate mode and not Constraints mode. (See button at the bottom of the PropertyManager). Type in the desired angle of rotation in the proper box to rotate the body about the X, Y, or Z-axis.

How do I change the degree in SolidWorks?

To specify units of degrees for calculated expressions, click Unit System > Edit Document Units (Status bar), and for Angle, select Degrees.

How do you Rotate a part in SolidWorks drawing?

To rotate a drawing view around its center point:

1. Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. …
2. Do one of the following: Drag the view to the desired rotation. …
3. Set options, then click Apply: …
4. Click Close to close the dialog box.