How do you reference lines in Revit?

In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection. When selected or highlighted, the associated planes display according to the active view.

How do you create a reference plan in Revit?

Add a Reference Plane

1. On the Draw panel, click (Pick Lines).
2. On the Options bar, specify an offset, if desired.
3. Select the Lock option to lock the reference plane to the line.
4. Move the cursor near the line to which you want to place the reference plane and click.

What is reference line in architecture?

While Reference Lines are used as control lines for information within a family similar to Reference Planes, they are not a type of Reference Plane. It is its own type of object designed for a separate purpose. … Reference Lines are created from the Datum panel of the Create tab within the Revit Family Creator.

What is reference line?

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

What is the use of reference plane in Revit?

Use the Reference Plane tool to draw reference planes to use as a guideline in your design. Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model.

What is meant by reference line and reference plane?

A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do I create a reference level in Revit family?

Add Levels

1. Open the section or elevation view to add levels to.
2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
3. Place the cursor in the drawing area and click. …
4. Draw level lines by moving the cursor horizontally. …
5. Click when the level line is the correct length.

What is reference point?

A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point. Objects that are fixed relative to Earth – such as a building, a tree, or a sign – make good reference points.

Where do you place the reference line?

In British English, the reference line typically appears after the letterhead, above the date, and on the left margin. In American English, it is usually left-justified and placed at the bottom of the letter.

What is a weak reference in Revit?

A weak reference has the lowest priority for dimensioning and snapping. When you place the family into the project and dimension to it, you may need to press Tab to select a weak reference, as any strong references highlight first.

How do you select planes in Revit?

Select a work plane by name, by picking a plane, or by picking a line in the plane you want to select. On the ribbon, click (Set). In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: Name—Choose an available work plane from the list, and click OK.