How do you measure a fillet radius in Solidworks?

How do you Measure a radius in Solidworks?

Measures distance, angle, radius, and size of and between lines, points, surfaces, and planes in sketches, 3D models, assemblies, or drawings. To open the Measure dialog box: Click Measure (Tools toolbar) or Tools > Evaluate > Measure. When you select a vertex or sketch point, the x, y, and z coordinates are displayed.

How do you change the radius of a fillet in Solidworks?

To automatically change or remove fillets using the FilletXpert Change tab:

1. In the FilletXpert PropertyManager, click the Change tab.
2. Inspect the fillet to change. …
3. In the graphics area, select the lower filleted edge.
4. Set the Radius to 1.0, then click Resize.

How do you do a multi radius fillet in Solidworks?

Toggling on the option for “Multiple radius fillet” in a “Constant Size Fillet.” Once you toggle on the option for “Multiple radius fillet,” a callout will appear on each of the edges that are selected to be filleted. In Figure 12, six edges have been selected to be filleted.

How do you change radius to diameter in SolidWorks?

To change the placement of circular dimensions:

1. Right-click the dimension.
2. In the Dimension PropertyManager, select the Leaders tab.
3. Under Witness/Leader Display, select a placement option. For example: Radius. Diameter. You can also right click the dimension and select Display Options.

How do you use the ruler in SolidWorks?

The rulers (and the status bar) show the position of the pointer on the sheet. To turn the ruler display on or off, click View > Rulers . To specify the major and minor ruler line graduations, click Tools > Options > Document Properties > Grid/Snap .

How do you Measure edges in SolidWorks?

To use the measure tool: Click Measure (Tools toolbar) or Tools > Evaluate > Measure.

How do I change a fillet type in Solidworks?

Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners. Click OK .

How do you face fillet in Solidworks?

To create a face fillet between surfaces:

1. Create two surfaces (the surfaces need not be adjacent).
2. Click Fillet (Features toolbar) or Insert > Surface > Fillet/Round.
3. In the PropertyManager, under Fillet Type, select Face fillet.
4. Under Items To Fillet, set a Radius value.

What is fillet in Solidworks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

How do you fillet only part of an edge in SOLIDWORKS?

Creating Partial Chamfers and Fillets

1. Under Chamfer Type, click Offset Face .
2. Select Full preview.
3. Select Partial Edge Parameters.
4. In Start condition, select Distance offset.
5. Set Offset distance from start point to 20 mm.
6. In End condition, select Distance offset.