How do you make hollow in Catia?

How do you make a hollow box in CATIA?

Creating Shells

1. Select the face to be removed.
2. Click Shell . The Shell Definition dialog box appears. …
3. Enter 15mm in the Default inside thickness field.
4. Click OK . …
5. Double-click the shell to edit it.
6. Decrease the inside thickness value. …
7. Click OK . …
8. Double-click the shell again and click the Other thickness faces field.

How do I create a groove in CATIA?

CATPart document and set Body as the current body.

1. Click Groove .
2. Select Sketch. 3 as the profile to be used. The Groove Definition dialog box is displayed. The application previews a groove entirely revolving about the axis.

What is function of multi section solid?

When a Multi-sections Solid feature is copy-pasted, the sketches used are not duplicated. The duplicated feature points to the already existing sketches. This behavior is specific to Multi-sections Solid . For Pad , Shaft and others features, sketches are duplicated while features are pasted.

What is rib command in Catia?

This task shows you how to create a rib, that is how to sweep a profile along a center curve to create material. To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile.

How do I use the slot in Catia v5?

The Slot Definition dialog box is displayed. To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction.

…

It is closed.

1. Click to open the Sketcher and edit the profile. …
2. For example, enlarge the profile.
3. Quit the Sketcher when done. …
4. Maintain the Keep angle option.

What is AC clip?

A circlip (a portmanteau of “circle” and “clip”), also known as a C-clip, Rotor Clip, snap ring or Jesus clip, is a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to …

How do I make a groove in Autocad?

To Insert a Groove on a Shaft

1. In the Shaft Generator dialog box, select the Groove option.
2. Specify the position where the groove is to be inserted in an existing shaft section.
3. Specify the length of the groove (use a negative value if the groove is to be placed to the left side of the starting point).

How do I create a polyline in Catia?

Creating Polylines

1. Click Polyline . The Polyline Definition dialog box appears.
2. Select several points in a row. …
3. From the dialog box, select Point. …
4. Select Point. …
5. Still from the dialog box select Point. …
6. Click OK in the dialog box to create the polyline. …
7. Double-click the polyline from the specification tree. …
8. Select Point.