How do you make a hole in Autodesk?

Which command uses an open sketch curve to create a thin feature?

Rib – Uses an open sketch curve to create a thin feature.

What is the command for drawing circle in AutoCAD?

To draw a circle with AutoCAD, enter the CIRCLE command and choose one of the following options: Center & Radius (CENRAD) — With this option, you first click where you want the center point of the circle to be, then move the pointing device to establish the perimeter of the circle.

How do you circle an array in AutoCAD?

Polar Array

1. Open the AutoCAD software.
2. Click on the Circle icon on the Ribbon Panel, as shown in the below image: …
3. Specify the center point on the workspace or drawing area to draw a small circle.
4. Specify the diameter for a first circle (example- 1) and Press Enter.

How do you make an angled hole in Inventor?

Here is one way to do it:

1. Start a new sketch on the desired face.
2. Draw a line to act as the hinge for the angle of the hole. …
3. Draw a point at the desired hole center.
4. Fully constrain the sketch.
5. Create a work plane at an angle to the face through the sketched line.

How do you make a rib in Fusion 360?

Create a rib

1. On the toolbar, click Solid > Create > Rib . …
2. In the canvas, select an open sketch profile to use as the Profile.
3. In the dialog, select a Thickness Direction: …
4. Select a Start option: …
5. Specify the Thickness value to extrude the rib, perpendicular to the sketch plane:

How many sketches are required to create a simple swept feature?

3 Unlike an extruded feature, a swept feature requires a minimum of two sketches.

How do you fully define a sketch?

To fully define a sketch:

1. Edit a sketch.
2. Click Fully Define Sketch. (Dimensions/Relations toolbar) or Tools > Dimensions > Fully Define Sketch.
3. Set the options for relations and dimensions in the Fully Define Sketch PropertyManager.
4. Click .