How do you make a cylinder in Catia v5?

How do you make a cylinder in CATIA?

Creating Cylindrical Surfaces

1. Click Cylinder . …
2. Select the Point that gives the center of the circle to be extruded and specify the desired Direction of the cylinder axis. …
3. Select the Radius of the cylinder.
4. Enter values or use the graphic manipulators to define the start and end limits of the extrusion.

How do you make a hollow cylinder in CATIA?

Steps

1. Click Solid > Create > Create Sketch .
2. Select the XZ plane to sketch on. …
3. Click Sketch > Create > Center Diameter Circle .
4. Hover over the origin (or center) of the sketch. …
5. Click once to begin placing the circle.
6. Drag the mouse away from the center to start sketching a circle. …
7. Click again to complete the circle.

How do I create a slot in CATIA v5?

To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. Select the profile, i.e. Sketch. 2 .

…

It is closed.

1. Click to open the Sketcher and edit the profile. …
2. For example, enlarge the profile.
3. Quit the Sketcher when done. …
4. Maintain the Keep angle option.

How do you make a Fusion 360 cylinder?

1) Create a cylinder by going to “CREATE” then selecting the cylinder primitive. 3) Shell your cylinder by going to “MODIFY” and selecting “Shell”. 2) Select the plane you wish to set it on then define the diameter and height. 4) Select the top face then define the wall width of your pot.

How do you make a hollow sphere in Catia?

CATPart document.

1. Click Sphere from the Extrude-Revolution sub-toolbar. …
2. Select the center point of the sphere.
3. Select an axis-system . …
4. Click Preview to preview the surface.
5. Modify the Sphere radius and the Sphere Limitations as required. …
6. Click OK to create the spherical surface.

How do I create a polyline in Catia?

Creating Polylines

1. Click Polyline . The Polyline Definition dialog box appears.
2. Select several points in a row. …
3. From the dialog box, select Point. …
4. Select Point. …
5. Still from the dialog box select Point. …
6. Click OK in the dialog box to create the polyline. …
7. Double-click the polyline from the specification tree. …
8. Select Point.

What is rib command in Catia?

This task shows you how to create a rib, that is how to sweep a profile along a center curve to create material. To define a rib, you need a center curve, a planar profile and possibly a reference element or a pulling direction. To create ribs you can combine the different elements as follows: Open profile.