How do you extrude a sketch in Solidworks assembly?

Can you Extrude cut in assembly?

You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut.

How do you edit a sketch in assembly in Solidworks?

To edit a part while in an assembly:

1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
2. Make the necessary changes to the part.

How do you cut a part in assembly in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you extrude Assembly in Inventor?

Click 3D Model tab Create panel Extrude . If there is only one profile in the sketch, it is selected automatically. Otherwise, select a sketch profile. Select the face, work plane, or surface from which to start the extrusion.

How do you copy and paste a sketch in Solidworks?

To copy and paste a sketch:

1. Select the closed sketch in the FeatureManager design tree.
2. Click Edit > Copy or press Ctrl+C.
3. Click in the sketch or document where you want to paste the center of the sketch.
4. Click Edit > Paste or press Ctrl+V.

How do you extrude with the same sketch?

Extrude the Rectangle



On the Features tab, click the Extruded Boss/Base command. The Boss-Extrude properties will appear in the Feature Manager. Click in the Selected Contours window and set the Depth to 1 inch. Now select the rectangle and a preview of the 1-inch extrude appears.

Can you extrude an open sketch?

Extrude Cut – Thin Feature



Thin features often use open sketches but can also use closed sketches. The thin features option gives the sketch a cut thickness and an extrusion depth as seen below in figure 1.

How do I alter an assembly in Solidworks?

Edit Assembly

1. Click Open (Standard toolbar) or File > Open.
2. In the dialog box, select an assembly, and then in Mode, select Large Design Review.
3. Select Edit Assembly.
4. Click Open. An eye overlay appears on the icons of all components indicating that the assembly is in Large Design Review mode.

How do I replace a component in Solidworks assembly?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.

How do I change a part reference in Solidworks assembly?

To edit the locations and names of referenced files:

1. Click Open or File > Open.
2. In the Open dialog box, click References. The Edit Referenced File Locations dialog box appears.
3. Edit the path or filename using one of the following methods: …
4. Click OK to make the changes and exit the dialog.