How do you do a broken out section view in Solidworks?

How do you do a cutaway view in SolidWorks?

To create a part cutaway view:

1. In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. …
2. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.

How do you break an isometric view in SolidWorks?

Model Break Views Within Drawings

1. In the Drawing View PropertyManager, under Reference Configuration, select Show in exploded or model break state.
2. Right-click the drawing view and click Properties. In the dialog box, in Configuration information, select Show in exploded or model break state, and click OK.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do you crop a view in Solidworks?

To crop a view:

1. In a drawing view, sketch a closed profile such as a circle.
2. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.

How do I create a detail view in Solidworks?

To create a detail view:

1. Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
2. The Detail View PropertyManager appears and the Circle tool. is active.
3. Sketch a circle. …
4. When the view is where you want it to be, click to place the view.

How do I create a section view in Solidworks assembly?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.

What is a section view?

What is a section view? A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views.

How do you use a phantom line?

Phantom Line



Phantom lines are long-short-short-long lines most often used to show the travel or movement of an object or a part in alternate positions. It can also be used to show adjacent objects or features.