How do you create a simulation report in Solidworks?

How do you write a simulation report?

The essential components of any figure or table describing a simulation scenario are as follows:

1. Frame.
2. Objective as related to the frame related to this frame (required)
3. Points of possible deterioration (required)
4. Hints/feedback (if applicable)
5. Other (if applicable)

How do I see simulation results in SOLIDWORKS?

To display SOLIDWORKS Simulation results in the graphics area:

1. Open an assembly that has a simulation study saved with it.
2. Click the Static 1 tab.
3. In the Simulation Study tree, right click Static 1 and click Run.
4. Click the Model tab.
5. Click Simulation Display (View toolbar) or View > Display > Simulation Display .

How do I export a SOLIDWORKS report?

Saving and Printing Reports

1. To export the report, click File > Export Results or Export Results (toolbar).
2. In the Export Results As dialog box: Select a destination folder. Type a file name. …
3. To print the report: Customize the header or footer of the report by clicking File > Page Setup .

How do I create a SOLIDWORKS Simulation in SOLIDWORKS?

To activate the Solidworks simulation, we go to tools, add-ins, and check the box next to the simulation add-in. So this will launch the simulation works add-in.

What is simulation report?

A simulation report is a text file that contains information regarding the transitions that occur during a simulation. Simulation reports for a given net are saved in simulation output directories as determined by Output management.

How do you discuss simulation results?

Guidelines for Analyzing Simulation Results

1. Look at the “big picture”. …
2. Look at the certainty level, the probability of achieving values within a certain range. …
3. Focus on the display range. …
4. Look at different views of the forecast. …
5. Customize the forecast chart. …
6. Create other kinds of charts (Table 1, Crystal Ball Charts).

How do you do a load test in SolidWorks?

How to Use Load Cases in SOLIDWORKS Simulation

1. Step 1: The Plan. …
2. Step 2: Open the File. …
3. Step 3: Create a New Static Study. …
4. Step 4: Apply the Material as Aluminum 1060 Alloy. …
5. Step 5: Apply Fixtures. …
6. Step 6: Apply Loads. …
7. Step 7: Mesh the Model. …
8. Step 8: Open Up the Load Case Manager.

What is von Mises stress in SolidWorks?

Von Mises stress is a value used to determine if a given material will yield or fracture. It is mostly used for ductile materials, such as metals.

Does SOLIDWORKS professional have simulation?

SOLIDWORKS Simulation Professional enables you to optimize your design, determine product mechanical resistance, product durability, topology, natural frequencies, and test heat transfer and buckling instabilities. It can also perform sequential multi-physics simulations.

How do you create a flow simulation in SOLIDWORKS?

To access flow simulation, first go to “Add-Ins” and make sure that the flow simulation check box for “Active Add-Ins is selected. Once the add-in is active, you can activate a new project by going to Tools > Flow Simulation > Project.

Does SOLIDWORKS premium include simulation?

SOLIDWORKS® Premium seamlessly integrates powerful design tools—including industry-leading part, assembly, and drawing capabilities with built-in simulation, cost estimation, rendering, animation, and product data management—to help you get your work done faster and easier than ever before.