How do you create a draft face in Solidworks?

How do you create a draft angle in Solidworks?

To insert a draft angle parting line:

1. Sketch the part to be drafted.
2. Insert a split line curve, if desired.
3. Click Draft on the Features toolbar or click Insert > Features > Draft.
4. Under Type of Draft, select Parting Line. …
5. Under Draft Angle, enter the Draft angle .

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).

What is a draft angle in Solidworks?

Draft tapers faces using a specified angle to selected faces in the model. One application is to make a molded part easier to remove from the mold. You can insert a draft in an existing part or draft while extruding a feature. You can apply draft to solid or surface models.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

How do I add a taper in Solidworks?

To extrude an entity with a taper angle:

1. Click Solids > Draw > Extrude (or type Extrude).
2. Specify the type of entities to create. Surface. …
3. Specify the entities to extrude and press Enter.
4. Specify the Taper angle option.
5. Specify the taper angle and press Enter.
6. Specify the extrusion height.

What is neutral plane in Solidworks?

You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds. You can also use the DraftXpert to create, change, or remove neutral plane drafts.

How do you draw a line in Solidworks?

To create a parting line:

1. Click Parting Lines. (Mold Tools toolbar) or Insert > Molds > Parting Line.
2. In the Parting Line PropertyManager, set options, then click. .

How do you draw in Solidworks?

Creating a New Drawing



(Standard toolbar) or File > New. In the New SOLIDWORKS Document dialog box, select Drawing , then click OK. Select options for Sheet Format/Size, then click OK. In the Model View PropertyManager, select a model from Open documents or browse to a part or assembly file.

How do you make a derived sketch in Solidworks?

Deriving Sketches in Parts

1. Select the sketch from which you want to derive a new sketch.
2. Hold the Ctrl key and click the face on which you want to place the new sketch.
3. Click Insert > Derived Sketch. …
4. Position the derived sketch by dragging and dimensioning it to the selected face. …
5. Exit the sketch.

How do you rib in SolidWorks?

To create a rib:

1. Sketch the contour to use as the rib feature on a plane that intersects the part, or is parallel or at an angle to an existing plane.
2. Click Rib (Features toolbar) or Insert > Features > Rib.
3. Set the PropertyManager options.
4. Click OK .

What is boundary boss in SolidWorks?

The SOLIDWORKS Boundary Boss Base tool is an often overlooked, but very useful tool found on the features toolbar. It’s very similar to the lofted boss base tool and it’s possible to create pretty much the same geometry (with subtle differences) with both.