How do you create a demo plan in Revit?

What is a demo plan?

A Demonstration Plan is required of all projects. The Demonstration Plan states what the demonstration will attempt to prove, the methodology which will be followed, the criteria for success, and the measurements that will be made to determine success.

How do you demo a wall in Revit?

Solution:

1. Select the element (or elements) in the Properties.
2. Change the Phase Demolished parameter to None.

How do you demo a floor in Revit?

You can’t demolish “part” of something in Revit. You’ll have to model it as two (or more) separate pieces, the piece(s) to remain and the piece(s) to be demolished. Then you demo the parts as needed.

How do you show all phases in Revit?

To access all Phases options, go to Phases menu in the Manage tab. The first thing you need to do is set the phases you require. RENOVATION PROJECT: In most Revit templates, the basic phases are Existing and New. For most project, this is all you will need.

How do you show different phases in Revit?

Click Manage tab Phasing panel (Phases). In the Phasing dialog, click the Phase Filters tab. Click New to insert a new phase filter. The filter is assigned a default name.

Who must prepare a work plan for the demolition?

A demolition plan should be prepared for all demolitions where there are a number of other persons conducting a business or undertaking (for example, subcontractors) involved. If the demolition contractor is also the principal contactor, the demolition plan should be incorporated as part of the WHS management plan.

What should be included in a demolition plan?

Then the building height, structural system, extent of damage to the building, existing structures and facilities in the vicinity, layout plan, proposed method of demolition, proposed shoring and precautionary measures for adjacent buildings, safety measures to be taken, proposed sequence of demolition steps, details …

What is phasing in Revit?

A phase filter is a rule that you apply to a view to control the display of elements based on their phase status: new, existing, demolished, or temporary. About Infill Elements for Phasing. Infill elements occur when a hosted element and its host do not have the same values for Phase Created and Phase Demolished.

How do design options work in Revit?

On the Manage tab within Revit, select the Design Option button. Select the New button under Design Option Set to create a new option set called “Option Set 1”. The first option will be automatically created and will be called “Option 1 (primary).

How do you remove phasing in Revit?

You cannot delete phases once they are created. They can only be combined with the previous or the next in the sequence.

How do you split elements in Revit?

Split Elements

1. Click Modify tab Modify panel (Split Element).
2. If desired, on the Options Bar, select Delete Inner Segment. When you select this option, Revit removes the segment of the wall or line between selected points.
3. Click the element at the point you wish to split.

What are parts in Revit?

Part elements in Revit support the construction modeling process by letting you divide certain elements from the design intent model into discrete parts. These parts, and any smaller parts derived from them, can be independently scheduled, tagged, filtered, and exported.