How do you center a circle in SolidWorks?

How do you center a shape in Solidworks?

Click Tools > Align, and select a tool from the menu. Select a group of annotations, right-click one of the annotations, select Align, and choose one of the options.

How do I mark a center point in Solidworks?

To insert center marks automatically:

1. Click Center Mark. (Annotation toolbar) or Insert > Annotations > Center Mark. …
2. Under Auto Insert, select one or more: For all holes. …
3. Set the options for the auto insert choices.
4. Set the remaining options in the Center Mark PropertyManager.
5. Select one or more drawing views.
6. Click .

How do you move a circle in Solidworks?

To modify a circle in an open sketch by dragging:

1. Increase the perimeter by dragging its edge away from its center point.
2. Decrease the perimeter by dragging its edge toward its center point.
3. Move the circle by dragging its center point.

How do you align features in Solidworks?

Aligning Sketches

1. Select a line or a point in a sketch to be aligned with another sketch.
2. Hold Ctrl and select a line or a point in the second sketch to which the first sketch is to be aligned.
3. Click Align Sketch (2D to 3D toolbar), or click Tools > Sketch Tools > Align > Sketch.

How do I center a line in Solidworks?

To create a centerline:

1. Click Centerline (Sketch toolbar) or click Tools > Sketch Entities > Centerline.
2. Click to start the centerline.
3. Drag, or move the pointer and click, to set the end of the centerline.

How do you center a rectangle in a circle?

Move the cursor toward the center of the rectangle until you see the tracking lines from both midpoints cross each other at the rectangle’s center. Click to specify the circle’s center. At the Specify radius of circle or [Diameter]: prompt, specify the circle’s radius.

How do I center a sketch to origin in Solidworks?

Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .

How do I center a hole in Solidworks?

In the Hole Alignment PropertyManager, select components to check and set the maximum acceptable hole center deviation. To open the Hole Alignment PropertyManager: Click Hole Alignment (Assembly toolbar) or Tools > Evaluate > Hole Alignment.

How do I remove a center mark in a Solidworks drawing?

Select Detailing from the Document Properties tab. Under Auto insert on view creation, select or clear the check box for: Center marks – holes -part.

…

Under Center marks:

1. Enter a value for Size. …
2. Enter a value for Gap. …
3. Select or clear the check boxes for Scale by view scale, Extended lines, and Centerline font.

How do you add a center mark in Autocad?

To add a center mark to a circle or arc select this tool from Centerlines panel of Annotate tab. The cursor will change into a Pickbox, click on the circle or arc and press enter to exit the command. You will notice that a default center mark will be added as shown in the image below.

How do you move a curve in SOLIDWORKS?

In sketch mode, do one of the following:

1. Click Move Entities. (Sketch toolbar) or Tools > Sketch Tools > Move.
2. Click Copy Entities. (Sketch toolbar) or Tools > Sketch Tools > Copy.
3. Right-click to display the Sketch shortcut menu, click Sketch Tools, and click Move Entities or Copy Entities.

How do you drag a shape in SOLIDWORKS?

In the SOLIDWORKS software, you can move sketch entities by selecting them and dragging. You can also stretch sketch entities by dragging. For example, select a line and drag an endpoint, or select a side or vertex of a rectangle and drag to stretch the rectangle. Drag dimensions and annotations to position them.

How do you move sketch Onshape?

To do so, first select the transform tool on the sketch toolbar.

…

StepsCopy link

1. Click .
2. Select the sketch entities you want to move.
3. Use the manipulator to drag and orient the sketch.
4. Click in space when the sketch is placed and oriented as desired.