How do I use the shell command in SolidWorks?

Why can’t I shell solidworks?

Shell fails because the shell thickness setting exceeds the minimum radius of curvature for the model. Some three-sided surfaces do not shell properly because of problems solving shells at the vertex. Shells can fail when swept cuts using an existing model edge produce small faces along the resultant edge.

How do you shell a sketch in Solidworks?

The Solidworks shell tool is located in both features commandmanager and Insert menubar.

…

How to Use Solidworks Shell Tool

1. Step 1: Create New Part File. Open Solidworks CAD software and create new part file. …
2. Step 2: Create Rectangle Box. …
3. Step 3: Select SolidWorks Shell Tool. …
4. Step 4: Apply Solidworks Shell Tool.

What does the Shell feature do?

The Shell feature hollows out the inside of the solid, leaving a shell of a specified wall thickness. It lets you specify a surface or surfaces that you want to remove from the shell.

How do I use Shell manager?

Open a part or assembly document. Click Simulation > Shells > Shell Manager , or.

…

Shell Manager List

1. Review all existing shell definitions and their parameters in a single interface.
2. Add shells to a shell group. …
3. Sort the shells by thickness or material. …
4. Edit a shell property by clicking the down arrow next to its cell.

What are shell elements solidworks?

For studies using sheet metals, the thickness of the shells is automatically extracted from the geometry of the model. To set the desired option for a study, right-click the Mesh icon, select Create Mesh, and expand Advanced. Shell elements are 2D elements capable of resisting membrane and bending loads.

How do you use a multi thickness shell?

Shell with Multi-Thickness Faces

1. Click in Multi-thickness Faces , then select the faces in the graphics area for which you want to set a thickness that is different from the Thickness under Parameters.
2. Select a face in Multi-thickness Faces , then set Multi-thickness(es) to set the thickness for the selected face.

How do you find the minimum radius of curvature in Solidworks?

Use the Check tool on the Tools toolbar to find the minimum radius of curvature. Add an extrude feature that covers the area where the shell offsets through an exterior face. Recreate the shell, removing all the extrude feature faces plus any model faces. Remove unintended small faces or edges.

What is fillet in SolidWorks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.

How do I view sections in SolidWorks?

To create a section view:

1. In a part or assembly document, click Section View. …
2. In the Section View PropertyManager, under Section Method, select one of the following: …
3. In the Section View PropertyManager, under Section Option, select how the section offset is calculated: …
4. Under Section 1, select a plane.