How do I use the pocket in Catia V5?

Contents

Is it possible to create pocket or groove as first features in Catia?

Yes, using the MULTIPAD option OR using simple PAD and in simple PAD select GOTO PROFILE option. 7) What is DRAFTED FILLETTED POCKET? It performs drafting, pocket& filleting simultaneously.

Where is the PAD command in Catia?

Creating Pads

Click Pad . The Pad Definition dialog box appears and the application previews the pad to be created.
Enter 40 in the Length field to increase the length value. You can increase or decrease length values by dragging LIM1 or LIM2 manipulators. …
Optionally, click Preview to see the result.
Click OK .

What are the commands in Catia v5?

Let’s see how each of these command are used.

PAD command.
POCKET command.
SHAFT command.
GROOVE command.
RIB command.
SLOT command.

What are the tools used in Catia?

CATIA Core Tools: Computer Aided Three-Dimensional Interactive Application, 1st Edition

FOREWORD.
ACKNOWLEDGMENTS.
THE DASSAULT SYSTÈMES SUCCESS STORY.
1 Getting Started. …
View sub-sections 2 Basic Settings. …
View sub-sections 3 Visualization. …
View sub-sections 4 Rough Overview. …
View sub-sections 5 Sketcher.

IT IS INTERESTING: Your question: How do I print to scale in SketchUp?

How do you make a shaft in Catia?

Open the Revolution. CATPart document and make sure that PartBody is set as current. Select Sketch.

…

An open profile (not even closed by the revolution axis) cannot be be used as the first feature in a body.

Click Shaft . …
Click OK to close the warning message and display the Shaft Definition dialog box.

How do you edit pads in CATIA?

Editing the Pad

You can do it in the specification tree if you wish.
In the Pad Definition dialog box that appears, enter 90 mm as the new length value.
Click OK . …
Now select Part Body .
Select the Edit -> Properties command and click the Graphic tab to change the color of your part.

How do I get all tools in CATIA v5?

Adding Toolbars from CATIA to 3DCS

Select Tools and go to the Customize option. From here, use the Toolbars tab to select New. When the New Toolbar window shows up, select Assembly Design, and the workbench toolbar you like to bring into 3DCS. Click OK.

What is pocket in CATIA?

Creating a pocket consists in extruding a profile or a surface and removing the material resulting from the extrusion. The application lets you choose the limits of creation as well as the direction of extrusion. The limits you can use are the same as those available for creating pads.

How do I open sketch tools in CATIA?

In CATIA, a sketch is drawn in the Sketcher workbench. To invoke the Sketcher workbench, choose the down arrow available on the right of the Sketcher button in the Sketcher toolbar; a flyout appears.

IT IS INTERESTING: What countries use ANSI?

To launch a toolbar, select View tab > Toolbars, as shown:

The next to the name of the toolbar indicates that the toolbar is launched. …
To restore the original positions of a toolbar, select the Tools tab > Customize > Toolbars (tab) > button, as shown:
Each toolbar contains a separator ( ,

How many modules are there in CATIA V5?

The complete Course on Catia V5 R20 is divided into 6 different modules: Complete Catia Sketching –Module 1. Complete Catia Part Modelling –Module 2.

How many workbenches are there in CATIA V5?

CATIA contains 92 different workbenches. This is a list of brief descriptions explaining what each workbench is designed to do.