How do I rebuild a sketch in Solidworks?

How do you rebuild a drawing in Solidworks?

To rebuild the model: Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.

Where is the rebuild tool in Solidworks?

The Rebuild toolbar buttons are located on the Standard toolbar. You can add the tools to the CommandManager, shortcut bars, and mouse gestures.

How can you correct an over defined sketch?

There are two common ways to fix over defining dimensions.

  1. Delete the over defining dimension in the graphics area.
  2. Right-click the over defining dimension in the graphics area and select Properties. …
  3. When you add a dimension that over defines a sketch, the Make Dimension Driven dialog box appears.

How can you correct an over defined sketch in Solidworks?

To manually repair over defined sketches:

  1. In the PropertyManager, under Message, click Manual Repair. All relations and dimensions in the sketch appear under Conflicting Relations/Dimensions.
  2. Select each relation or dimension to highlight it in the graphics area. For example: …
  3. Click Delete. Valid solution found. …
  4. Click .
IT IS INTERESTING:  Can DWG files be converted to PDF?

What is rebuild error in Solidworks?

Some common rebuild errors include: Dangling Dimensions or Relations. Dimensions or relations to an entity that no longer exists. Features that cannot be rebuilt, such as a fillet that is too large.

How do I turn off auto rebuild in Solidworks?

To turn off the option, right-click the assembly name at the top of the FeatureManager design tree, and clear Suspend Automatic Rebuild.

How do I find a circular reference in Solidworks?

In your assembly, simply go to your Command Manager, click on the Evaluate tab, then the Performance Evaluation. Alternately, you could use the dropdown menu and go to Tools > Evaluate > Performance Evaluation.

What is required to create a new 2D sketch in Solidworks?

How to make a 2D drawing in SOLIDWORKS

  1. If the part/assembly is open, select Make Drawing from Part/Assembly in the New flyout menu. …
  2. Select Drawing to use a default template.
  3. Click OK.
  4. Select a sheet size and format.
  5. Select a standard view orientation.
  6. Begin a SOLIDWORKS 2D drawing.

Where is sketch error in Solidworks?

To check a sketch:

  1. In an open sketch, click Tools > Sketch Tools > Check Sketch for Feature.
  2. For Feature Usage, select Base Revolve. …
  3. Click Check. …
  4. Delete the highlighted line.
  5. Click Check again. …
  6. Delete the highlighted line.
  7. Click Check again. …
  8. Trim one end of the line and extend the other end.

How do I get my ribbon bar back in Solidworks?


  1. Right-click in the window border and select or clear a toolbar name.
  2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
IT IS INTERESTING:  You asked: What language is Dynamo Revit?

How many customized templates does SOLIDWORKS allow?

When first installing the software, you will be presented with a choice of three templates, Part, Assembly or Drawing, as shown in Figure 2. Figure 2. The three default out-of-the-box templates. These three templates provide you with out-of-the-box settings.

How does SOLIDWORKS warn you that a sketch is Underdefined?

Well you could open up all sketches in turn, or check the sketch name for a (-) symbol: this means the sketch is under-defined.

How can you create a SOLIDWORKS drawing from an existing part?

To create a drawing from within a part or assembly document:

  1. Click Make Drawing from Part/Assembly. (Standard toolbar or New. flyout menu).
  2. Select options for Sheet Format/Size, then click OK.
  3. Drag views from the View Palette into the drawing sheet, and set options in the PropertyManager.
Special Project