How do I move ordinate dimension in Solidworks?

How do I edit an ordinate dimension in Solidworks?

To add more dimensions along the same ordinate:

1. Right-click an ordinate dimension, and select Add To Ordinate.
2. Click the edges, or vertices, or arcs you want to dimension using the same ordinate. …
3. Select another mode or another tool or press Esc to exit from the ordinate mode.

How do you move zeros in ordinate dimension in Solidworks?

When you drag any member of the group, all the members move together. To disconnect a dimension from the alignment group, right-click the dimension, and select Break Alignment. You can drag the zero dimension to a new position, and all the ordinate dimensions update to match the new zero position.

How do you use vertical ordinate dimension in Solidworks?

Creates vertical ordinate dimensions in a drawing or sketch, measured vertically from the entity you select first. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Vertical Ordinate. Click the first item from which all others will be measured, and click again to place the dimension.

How do I change the dangling dimension in Solidworks?

Potential Fixes



To set the color for dangling dimensions, click Tools > Options > System Options > Colors . Select Dimensions, Dangling in Color scheme settings. Click Edit, select a color, then click OK. Drag the dangling handle and reattach it to the correct sketch entity.

What are ordinate dimensions in Solidworks?

Ordinate dimensions are a set of dimensions measured from a zero ordinate in a drawing or sketch. In drawings, they are reference dimensions and you cannot change their values or use the values to drive the model. Ordinate dimensions are measured from the axis you select first.

How do I show hidden ordinate dimensions in Solidworks?

Showing Dimension Names



To show dimension names: Click View > Hide/Show > Dimension Names or Hide/Show Items > View Dimension Names (Heads-up View toolbar).

How do I edit ordinate dimensions in Inventor?

Add ordinate dimensions

1. On the ribbon, click Annotate tab Dimension panel Ordinate .
2. In the graphics window, select the view to dimension.
3. Place the origin indicator.
4. Select the geometry to dimension in the graphics window.
5. Right-click and select Continue.
6. Move the cursor to preview placement of the dimensions.

What is datum in Solidworks?

You can attach a datum feature symbol to the following items: In a part or assembly, on a planar model surface or on a reference plane. In a drawing view, on a surface that appears as an edge (including silhouette edges) or on a section view surface to identify datum planes in the part. A geometric tolerance symbol …

How do you do a hole callout in Solidworks?

To add a hole callout:

1. Click Hole Callout (Annotation toolbar), or click Insert > Annotations > Hole Callout. …
2. Click the edge of a hole, then click in the graphics area to place the hole callout. …
3. Edit the callout in the Dimension PropertyManager. …
4. Repeat steps 2 through 4 to insert additional hole callouts, then click .

What is an angular dimension?

Angular dimensions measure the angle between two non-parallel lines, the angle subtended by an arc, or the angle formed by three selected points. In addition, you can control the layer on which the dimension is created.

How do you use smart dimension in Solidworks?

To add a dimension to a sketch or drawing:

1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
3. Click to place the dimension. To dimension the…

How do you add dimensions to a Solidworks drawing?

You can specify that dimensions marked for drawings be inserted automatically into new drawing views. Go to Tools > Options and in the Document Properties tab, click Detailing. Select Dimensions marked for drawing under Auto insert on view creation.

How do I get rid of dangling dimensions?

To do this, follow the steps below:

1. Open the master drawing in SOLIDWORKS. …
2. From the SOLIDWORKS Menu select Tools>Options.
3. Select the Document Properties tab.
4. Select Detailing from the categories on the left.
5. Locate the Hide dangling dimensions and annotations option and check the box next to it.

How do I reattach a dimension in Solidworks?

To reattach a dangling center mark:

1. Right-click the dangling center mark and click Reattach.
2. In the same drawing view, select the hole edge, fillet, or slot whose center mark you want to reattach to the center mark set. The center mark reattaches to the new selection and the connection lines update.