How do I flex an assembly in Solidworks?

How do you bend an assembly in SolidWorks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

How do you flex in SolidWorks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .

…

Repositioning the Triad and Trim Planes

1. Select a coordinate system feature .
2. Change the Rotation Origin. , …
3. Change the Rotation Angle , , or to rotate the triad around these axes.

Can you make flexible parts in SolidWorks?

You can use the Make Part Flexible tool to remap the out-of-context reference to the second assembly. As a result, the spring is driven by the second assembly without affecting the nominal length of the spring. You can use Make Part Flexible under the following conditions: A single part is selected.

Can you make something flexible in SolidWorks?

In the FeatureManager design tree, click the rigid subassembly, and click Make Subassembly Flexible . To make a flexible subassembly rigid, click the subassembly and click Make Subassembly Rigid . You can also click Flexible or Rigid (Assembly toolbar).

How do you change the bend axis flex in Solidworks?

Example of Flex Bending

1. Move the pointer over the triad arrows to display the drag/rotate pointer. . …
2. Move the pointer over the trim plane manipulators to display the move pointer . …
3. Move the pointer over the edge of the trim planes to display the bending pointer .
4. Drag the trim planes to bend and modify the flex feature.

How do I use the wrap feature in Solidworks?

Wrap

1. Select the sketch you want to wrap from the FeatureManager design tree. …
2. Click Wrap on the Features toolbar, or click Insert > Features > Wrap.
3. In the PropertyManager, under Wrap Type: …
4. If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . …
5. Click OK .

How do I use the Deform tool in Solidworks?

To open the Deform PropertyManager with Surface Push options:

1. Click Deform. on the Features toolbar, or click Insert > Features > Deform.
2. In the PropertyManager, under Deform Type, select Surface Push.

How do you bend extruded parts in Solidworks?

Using Insert Bends to Add a Body

1. In a sheet metal part, select or create a plane and draw a profile sketch.
2. Click Extruded Boss/Base (Features toolbar).
3. In the PropertyManager: Set the direction and depth of the extrusion. …
4. Click Insert Bends. (Sheet Metal toolbar) or Insert > Sheet Metal > Bends .
5. In the PropertyManager:

What is a flexible assembly solidworks?

By default, when you create a subassembly, it is rigid. Within the parent assembly, the subassembly acts as a single unit and its components do not move relative to each other. However, you can make subassemblies flexible. This allows movement of the individual components of a subassembly within the parent assembly.

How do you make a part flexible in Solidworks 2021?

In the FeatureManager design tree, right-click the spring component and click Make Part Flexible in the context menu. In the graphics area, a preview of the unattached reference entity appears. To reattach the reference entity, click a planar face on the model. Click .

How do you make a spring flexible in Solidworks?

Click . In the FeatureManager design tree, right-click Spring<1> and click Make Part Flexible in the context menu.