How do I curve a fillet in AutoCAD?

How do I change the radius of a fillet in AutoCAD?

Set the Fillet Radius

1. Click Home tab Modify panel Chamfer and Fillet drop-down menu Fillet. Find.
2. At the Command prompt, enter r (Radius).
3. Enter a new fillet radius value.

Why is fillet not working AutoCAD?

This happens because AutoCAD is 3D capable software and cannot connect objects that have no intersection point in 3D space. To make it work you just have to change all Elevations to 0, or at least have them at equal one.

What is a Pedit?

Common uses for PEDIT include joining 2D polylines, converting lines and arcs into 2D polylines, and converting polylines into curves that approximate B-splines (spline-fit polylines). Different prompts are displayed, depending on the type of object you select to edit.

What does AutoCAD stand for?

it is comprised of 2 words Auto and CAD. AUTO stands here for AUTODESK ,an american company (parent company of autocad) CAD stands here for computer aided drafting or design as this software is used mainly for drafting but also has some designing features.

Is fillet or chamfer stronger?

Fillet gives better stress flow (less resistance) compared to chamfers. Fillets generally give a lower stress concentration factor than chamfers . Chamfers are more forgiving when fitting mating parts. i.e. even if there are inaccuracies in a chamfer mating parts might fit together.

What angle is a chamfer usually?

Threaded-hole chamfers normally have included angles of 120° or 90°, with 90° being most common. The OD and depth of the chamfer sometimes are specified on the blueprint.

How do I reset my fillet command in AutoCAD?

When the fillet radius is set to 0, you can remove the arc segment between two straight line segments or all arc segments from a 2D polyline.

1. Click Drafting tab > Modify panel > Fillet drop-down > Fillet.
2. At the Command prompt, enter r (Radius).
3. Enter a new fillet radius value.

What does lines are not coplanar mean in AutoCAD?

What does lines are not coplanar mean in AutoCAD? Basically it means that one or more of the Line or Polyline Vertices is/are not at the same elevation as the other verticies. In other words, the the Z Coordinate of the Lines and Polylines are not all at the same level.