How do I create a terrain in Revit?

How do you add topography in Revit?

In Revit, link the topography to the current model as follows:

1. Specify coordinates for the building model. …
2. Open a plan view or a 3D view for the building model. …
3. Click Insert tab Link panel (Link Topography).
4. In the Link Topography dialog, navigate to the topography. …
5. Select the desired topography, and click Link.

How do you create a site model in Revit?

Create the Site Plan

1. Define site settings. …
2. Create the toposurface. …
3. Rotate the project to True North. …
4. Specify property lines. …
5. Add a building pad. …
6. Grade the toposurface. …
7. Create parking lots, roads, and sidewalks. …
8. Add site components.

Where are Revit site settings?

To access the Site Settings dialog, click the dialog launcher on the Model Sight panel. In the Site Settings dialog, you can modify the contour line display by adding contours. To do this, click Insert. Change the Start, Stop, and Increments values and select the desired Range Type and Subcategory.

What is building pad in Revit?

You add a building pad by sketching a closed loop on a toposurface. After sketching the pad, you can specify a value to control the height offset from the level and other properties. … You then sketch a pad on the surface at an offset of –20 meters from the surface.

What is the use of Toposurface in Revit?

The Toposurface tool defines a topographical surface (a toposurface) using points or imported data. You can create toposurfaces in 3D views or site plans. Watch these videos to learn how to create and work with toposurfaces, subregions, and graded regions. Create a toposurface by placing points in the drawing area.

How do you make a hill in Revit?

Create a Toposurface by Placing Points

1. Open a 3D view or a site plan view.
2. Click Massing & Site tab Model Site panel (Toposurface).
3. On the Options Bar, set a value for Elevation. …
4. Next to the Elevation text box, select one of the following: …
5. Click in the drawing area to place points. …
6. Click (Finish Surface).

How do you add thickness to topography in Revit?

To create the thickness you either create a copy of the 3D view or work in the default 3D view. 2. You then switch on the section box in view properties dialog. slightly into your 3D surface until you see you Topography Cut pattern appears.

How do you show contours in Revit?

Contour labels display in site plan views.

1. Create a topographic surface with different elevations.
2. Open a site plan view.
3. Click Massing & Site tab Modify Site panel (Label Contours).
4. Sketch a line that intersects one or more contour lines.

How do you dimension a site plan in Revit?

Anyway , there is a quick way to do it , even with this additional lines:

1. in Siite Plan View, select Subregion >Edit Boundary >enter in Sketch Mode and put Dimensions.
2. still in Sketch Mode select the sketch and the dimensions > Clipboard – Copy.
3. exit from Sketch Mode.
4. Paste> Aligned to Current View.