How do I create a new wall sweep in Revit?

Click Architecture tab Build panel Wall drop-down (Wall: Sweep). In the Type Selector, select the desired type of wall sweep. Click Modify | Place Wall Sweep Placement panel, and select the orientation of the wall sweep: Horizontal or Vertical. Place the cursor over the wall to highlight the wall sweep location.

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

What is a sweep in a foundation wall?

Foundation walls and piers in small residential buildings are usually made of masonry. … Horizontal bulging in the masonry is known as sweeping.

How do I create a new wall sweep profile?

Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep). On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties. In the Type Properties dialog, for Profile, select the desired profile type. Click OK.

How do I load a wall sweep in Revit?

Load or sketch a profile. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. If the profile you need is not already loaded in the project, click Modify | Sweep tab Sweep panel (Load Profile) to load the profile.

How do you create a curved extrusion in Revit?

Choose Surfaces > Swept Surfaces > Extrude from the tool palette. Pick the curve or curves you want to extrude. You can select free curves, curves on surface, isoparametric curves, or trim edges. Click Go.

How do you draw a spline in Revit?

Click Place Lines tab (or respective Place tab or Create tab) Draw panel (Spline), and place the cursor in the drawing area. Click to specify the start point for the spline. Move the cursor and click to specify the next control point on the spline. Repeat as necessary.